silicone fire sleeve
500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 GradeAerostylesilicone fire sleeve
silicone fire sleevewith velcrowas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Aerostyle Fire Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade silicone coated fiberglass fire resistant sleeve with velcrois insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
See all BSTFLEX fire sleeve here
Fire Sleeve With Metal Snap Closure
Send product request
Other supplier products
 |
titanium Thermal Heat Wrap | 1200°F / 648°C Continuous Exposure: Higher Intermittent titanium Thermal Heat Wrap titanium Thermal Heat Wrapis made from pulverized lava r... |
 |
titanium Exhaust Header Wrap | 1200°F / 648°C Continuous Exposure: Higher Intermittent titanium Exhaust Header Wrap titanium Exhaust Header Wrapis made from pulverized la... |
 |
Silica Adhesive-Backed Slit Tapes | Silica Adhesive-Backed Slit Tapesis a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhes... |
 |
black colored silicone fiberglass braided heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittentblack colored silicone fiberglass braided heat sleeve Fire sleeve with velcro is knitte... |
 |
fiberglass braided heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fiberglass braided heat sleeve Industry heat sleeveis designed to protect hoses,w... |
Same products
 |
MONSA® DDAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
Common Rail Injector | Seller: DIP (DIESEL INJECTION PARTS) PLANTS | Item: Diesel Fuel Injector Model No: MOQ: 1pc Material: SteelPackage Deta... |
