DY-201 Dimethyl silicone fluid oil manufacturer

Specifications

 

CH3)3SiO[(CH3)2SiO]n-Si(CH3)3 
CAS 63148-62-9 
manufacturer, lowest price great quality 
ISO 9001 SGS Reach 
15cp-2000kcp 

 

 

DY-201 Dimethyl silicone fluid oil manufacturer

Contact: Jane Gong, e-mail:dayichemical at yahoo.com Mobiel:86-15306386035 Skype: chggzz

Introduction

 

-  DY-201 Two dimethyl silicone oil, chemical name is Polydimethylsiloxane, which formula is (CH3)3SiO[(CH3)2SiO]n-Si(CH3)3, this products is a kind of transparent, colourless polydimethylsilixane liquid, available viscosities ranging from 12cps to 2000000cps.

-  Little change in physical properties over a wide temperature span - arelatively flat viscosity-temperature slope, and serviceability from  -50°C up to 200°C.

-  Excellent water repellency.

-  Good dielectic properties over a wide range of temperatures and frequencies.

-  Low surface tension - readily wets clean surfaces to impart water repellency and release characteristics.

-   Viscosities above 10 mm²/s also exhibit heat stability, oxidation resistance, very low vapour pressures, and high flash point.

-   Low order of toxicity

-   Essentially odourless

-   Soluble in a wide range of solvent

-   Non-greasy and non-rancidifying

Technical specification

 

Intems  index

201-15

201-50

201-100

201-200

201-500

201-1000

Viscosity(25 °C)mpa.s

15±2

50±5

100±5

200±10

500±50

1000±80

Flash point ≥°C)

160

270

310

310

310

310

Specific gravity(25°C)g/cm3

0.930-0.940

0.955-0.965

0.960-0.970

0.962-0.972

0.965-0.975

0.967-0.975

Volatile content(≤)

1.5

1.0

1.0

1.0

1.0

1.0

Application

RELEASE MATERIAL: Used alone or as part of a compounded formula,

DY-201 Fluid provides a non-carbonising mould release for rubber, plastics, and metal die castings.

FOAM PREVENTITIVE: Extremely small amounts of the fluid effectively control foam in many processing operations, especially in non-aqueous systems.

MECHANICALFLUID:Excellent viscosity-temperature characteristics,

thermal and chemical stability, shear-breakdown resistance, compressibility, and rubber compatibility make DY-201 Fluid outstanding for mechanical/ hydraulic uses. Typical uses include hydrolic stabilisers, damping media.

 

• SURFACE-ACTIVE MATERIAL: Added to vinyl plastisols,

DY-201 Fluid improves the flow characteristics, de-aerates and

lubricates the surface of the completed part.

• LUBRICANT: The fluid provides excellent lubrication for most plastic and elastomeric surfaces. Lubricity with metals depends upon the combination involved. Care should be taken to select suitable metals for pumps and other items with moving parts.

• COSMETICS AND SKIN PREPARATIONS: DY-201 Fluid is an important ingredient in hand creams, skin protectants, suntan lotions, and hair grooming aids because it forms a non-greasy, protective film which resists water and waterborne irritants, yet allows the skin to breathe. Literature is available that details the use of the fluid in cosmetics.

• POLISHES AND CHEMICAL SPECIALITIES: DY-201 Fluid is used in most automobile and furniture polishes for its ease of application,high gloss with minimum rubbing, and a durable water-repellant film. It is also used in many other speciality formulations, including aerosol starches and fabric conditioners. Additional literature is available.

• ELECTRICAL/ELECTRONIC EQUIPMENT: With excellent dielectric

properties, DY-201 Fluid can be used for both insulating and

damping applications.




Send product request

To: Shandong Dayi Chemical Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Methyl hydrogen silicon oil for silicone rubble(DY-H202)
Methyl hydrogen silicon oil for silicone rubble(DY-H202) DY- H202 Methyl hydrogen silicone oil H2021 Methyl hydrogen silicone emulsion   Contact: Jane Gong, e-mail:dayichemical at aliyun.com Mobiel:8...
Pure silicone oil 350 for mold release agent
Pure silicone oil 350 for mold release agent Dimethyl silicone oil, chemical name is Polydimethylsiloxane, which formula is (CH3)3SiO[(CH3)2Si...
DY-ET113 pu resin water-proofing agent siliocne oil(water-solubility)
DY-ET113 pu resin water-proofing agent siliocne oil(water-solubility) Specifications   water-proofing agent of polyether modification polysiloxane ISO9001 REACH SGS Manufactured by ourselves compet...
 Alkyl modified white silicone grease for cosmetics(DY-A601
Alkyl modified white silicone grease for cosmetics(DY-A601 DY-A601 Alkyl modified silicone grease   Contact: Jane Gong, e-mail:dayichemical at aliyun.com Mobiel:86-15306386035 :chggzz QQ:1517168880 &nb...
DY-N322 Modified amino silicone oil for hair soft
DY-N322 Modified amino silicone oil for hair soft Specifications ISO 9001 SGS Manufactured by ourselves competitive price Export to India Iran and so on good quality DY-DY-N322 amino silicone oil C...
All supplier products

Same products

brake pad for American cars European cars and Japanese cars
brake pad for American cars European cars and Japanese cars Seller: Changchun Bridge Automobile Parts Co.,Ltd 1.Wide coverage 90% 2.High temperature 3.Safe and comfortable 4.Low-Noise and long service life 5...
brake pad back plate and shim
brake pad back plate and shim Seller: Changchun Bridge Automobile Parts Co.,Ltd Changchun Bridge Automobile Parts Co,. Ltd is an integrated company specializes in producing and ...
brake pad cross reference for OE number FDB number
brake pad cross reference for OE number FDB number Seller: Changchun Bridge Automobile Parts Co.,Ltd High quality shim for noise and vibration abatement Backing plate coated to prevent corrosion
brake pad formula ceramic and semi-metal
brake pad formula ceramic and semi-metal Seller: Changchun Bridge Automobile Parts Co.,Ltd OE chamfered excluding water,dirt and dust from surface Slotted to improce heat transfer&exte...
China top quality factory car brake pad
China top quality factory car brake pad Seller: Changchun Bridge Automobile Parts Co.,Ltd We provide 3 major sorts of products—brake disc, brake pad and brake drum. Over 2,000 model...