Medical Face Mask Synthetic Blood Penetration Resistance Tester
Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood at different test pressures,and can also be used to determine the resistance to blood penetration of other coating materials.
Application
The device is used for anti-synthetic blood penetration of medical surgical masks, and mainly used in the field of medical protection products. It can also be used for other textile coating material determination.
GB 19083-2010Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood.
YY/T 0691-2008Clothing for protection against infectious agents-Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
YY 0469-2011Technical requirements of medical face masks– Blood penetration test apparatus.
ISO 22609：2004Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
ASTM F1862-07Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Know Velocity)
YY/T 0691-2008Clothing for protection against infectious agents-Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
YY 0469-2011Technical requirements of medical face masks– Blood penetration test apparatus.
ISO 22609：2004Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
ASTM F1862-07Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Know Velocity)
| Items | Parameters |
| Injection distance | 300mm～305mm, adjustable |
| Nozzle diameter | 0.84mm |
| Jet velocity | 450cm/s,550cm/s,635cm/s |
Standards
1.The protruding sample fixture can simulate the actual use condition of the mask. Reserve the test target area without destroying the sample, and distribute synthetic blood in the sample target area.
2.A special jet device with constant pressure can spray a certain volume of synthetic blood in a controlled time.
3.It can fully simulate the corresponding injection rate to test under the average blood pressure of the human body at 10.6kPa, 16kPa, 21.3kPa.
4.The fixed target plate can block the high pressure part of the injected liquid flow to allow the steady flow to be sprayed to the sample, increasing the accuracy and repeatability of liquid spraying speed.
Send product request
Other supplier products
 |
Burning Manikin System | IntroductionThe burning manikin system is used to test the overall thermal protection performance of protective clothing.Complete combustion maniki... |
 |
Filter Media Tester HMT 1000 | Heatable modular test system for oil mist separators in accordance with ISO 20654 Quality assurance and the development of filters/separators/traps... |
 |
Universal Abrasion Resistance Tester | Introduction·The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close andfleec... |
 |
Fiber thermal shrinkage tester | Intelligent fiber heat shrinkable tester used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, b... |
 |
Digital Hydraulic bursting strength tester | Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of appli... |
Same products
 |
Fischer Tropsch wax white granules used in candle | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is used in various formulations of hot-melt adhesives: Low-temperature/high-... |
 |
Mining Machinery Parts | Seller: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Mining Machinery Parts HEAVY-DUTY MINING EQUIPMENT PARTS SUPPLIER Mining Equipment Parts ... |
 |
PH-08 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-08 Range PH 0.00～14.00PH Temp 0～50℃ Resolution PH 0.01PH Temp 0.1℃ Accuracy PH ±... |
 |
candle raw material White Wax with low melting point | Seller: Syntop chemical Co.,Ltd. | Lubricant wax: Fischer-Tropsch wax is widely used in the lubricants sector. It offers excellent l... |
 |
Fischer Tropsch wax used for road marking paint | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is widely used in road marking paints and serves as a key performance additiv... |
