QT-DN02 layered silt and sediment sampling kit (stainless steel)
Product description: This sampling kit is used for layered river silt or sediment sampling. It can take samples in 3 layers, with the standard sampling depth of 3 m and the minimum sampling depth of about 30 cm. Additional sampling tube is optional for increased sampling depth.
Features:
- Continuous sampling of silt or sediment
- Standard 3 m connecting rod, other lengths can be customized.
- Standard 0.9 m sampling tube, other lengths can be customized.
- A full set of components required for sampling, slide hammer makes sampling easier.
- Durable carrying case for sampling kit
Technical specifications:
|
NO |
Name |
Description |
Qty |
|
1 |
Sampling tube |
Diameter 5.2CM, SUS304 stainless steel , threaded connections |
3 |
|
2 |
Slide hammer |
Weight 8 lb., high-quality carbon steel, threaded connection |
1 |
|
3 |
Heavy cross handle |
High-quality carbon steel, with a rubber handle, removable crosshead , the handle can be connected to the slide hammer or energy-absorbing hammer |
1 |
|
4 |
Sampling head I |
With valves , SUS304 stainless steel , threaded connections |
1 |
|
5 |
Sampling head II |
SUS304 stainless steel , threaded connections |
1 |
|
6 |
Connecting rod |
1 m long , with scale at an interval of 10CM , SUS304 stainless steel , threaded connections |
3 |
|
7 |
Sampling tube liner |
Diameter 4.4 cm, PC transparent tube , length: 12 " 2 , 24" 1 , 36 " 1 |
4 |
|
8 |
Tube liner cover |
Nylon |
8 |
|
9 |
Gloves |
Non-slip , waterproof, cotton lining |
1 |
|
10 |
M wrench |
12 inches , with a non-slip grip |
2 |
|
11 |
Cleaning brush |
Nylon |
1 |
|
12 |
Measuring tape |
5m |
1 |
|
13 |
Strap wrench |
22.5 cm |
1 |
|
14 |
Durable Carrying Case |
With shockproof sponge inside , ABS material |
1 |
ORIGIN:CHINA
Send product request
Other supplier products
 |
CS451/455 water pressure and water level sensor | The CS455 water pressure sensor produced by the American Campbell company can provide accurate and reliable water pressure and water temperature da... |
 |
CS511 dissolved oxygen sensor | CS511 is a solid wear-resistant, low-maintenance dissolved oxygen sensor. It has a built-in self-polarized spontaneous battery that generates a mil... |
 |
CS120 visibility sensor | The CS120 visibility sensor uses tried and tested infrared forward scattering technology and a 42° scattering angle to predict the meteorologic... |
 |
OBS300 turbidity sensor | By using OBS technology, the OBS300 sensor can measure suspended matter with turbidity up to 4000NTUs. The sensor works by emitting near-infrared l... |
 |
QT-GT03 Cable-stayed Tower | QT-GT03 tower is easy to install on the ground, then it can be pulled up by lifting lever and winch. After this, all the stainless wind cables shou... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
