SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber
Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber supplierspecializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production scale of up to 10,000 tons of steel fiber for concrete. It mainly produces glued steel fiber, copper-coated micro steel fiber and loose steel fibers.
The glued steel fibers are water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, airport pavement and other fields with its excellent tensile, bending, shear, crack resistance, impact resistance, fatigue resistance, and high toughness.
The Specification of SDS-05035 0.50mm Diameter 35mm Length Glued Hooked End Steel Fiber
|
Name |
SD-05035 |
|
Type |
Glued |
|
Diameter |
|
|
Length |
35mm |
|
L/D(length/diameter) |
70 |
|
Tensile strength |
>1150Mpa |
|
Application |
shotcrete |
The Advantages of SDS-05035 0.50mm Diameter 35mm Length Glued Hooked End Steel Fiber
It is made of high-speed wire, which could make sure it has high tensile strength;
It has good dispersion, which can make sure quick and convenient mixing and evenly spread in concrete.
Reduce steel reinforcement requirements;
Reduce crack widths and control the crack widths;
The glued steel fiber is widely used in bridge, high way, tunnel, industrial floors and etc.
Steel high strength fiberUSER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05035 0.50mm Diameter 35mm Glued Length Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
Now the steel fibre priceis very reasonable.
Send product request
Other supplier products
 |
SDS Micro Copper Coated Steel Fiber | Micro brass fibers are made of copper coated steel wire , which is the most important materials of RPC and UHPC. UHPC has the features of very high... |
 |
SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber | The glued steel fiberare water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, airpo... |
 |
SDS Steel Fiber | The steel fiberfor concrete reinforcement is a new kind of metal material, in order to enhance concrete and shotcrete in its hardened state. Tengzh... |
 |
Steel Fiber For Fatigue Resistance | Steel Fiber For Fatigue Resistance Fatigue resistance of cn steelfiber compared with ordinary concrete, the flexural and compressive fatigue pro... |
 |
Steel Fiber For Fatigue Resistance | Fatigue resistance of steel fiber compared with ordinary concrete, the flexural and compressive fatigue properties of steel fiber reinforcedconcret... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
