.

FRONT TERMINAL BATTERY

Type of Front Terminal Battery

Front Terminal AGM Battery

The front terminal AGM battery is designed for telecommunications applications with a floating charge life of up to 12 years and uses a thickened 3D curved plate with a special paste formulation and the latest AGM baffle technology. It has stable performance and good consistency, it is suitable for outdoor telecommunications occasions and other backup power applications. The features and advantages are as follows:

Sealing structure (leakproof), no leakage, no acid fog, no need to add acid and water during use

Long service life of deep circulation and 12 years design life of floating charge

Temperature range: -15°C ~ 55°C

High tin thickening 3D surface plate design

Special lead paste is added to improve charging receptivity

Low self-discharge rate

Good recovery performance of deep discharge

Front Terminal Gel Battery

The front terminal gel battery is elongated, with a general design life of 15 years, and adopts thickened 3D curved plate and nanometer colloid electrolyte technology. Its cycle life is long, floating charge flow is small, high temperature performance is stable. The long and narrow front terminals are designed to be easy to install and maintain and perfectly compatible with standard cabinets/racks. It is suitable for outdoor telecom base station, solar energy, wind energy system and other occasions without temperature control and frequent power cut. The features and advantages are as follows:

Floating charge design life is 15 years

Wide range of service temperature:-15°C ~ 60°C

Nanometer colloid electrolyte is adopted, without electrolyte stratification

Longer cycle life

The front terminal colloidal battery is 30% lower than AGM battery, which is more suitable for high temperature floating charging applications and is less likely to lose control of heat

High tin alloy and thick plate design

Lower self-discharge (service life up to 9 months at 20°C)

Excellent recovery ability after deep discharge

Application of Front Terminal Battery

A front terminal battery, also known as a "narrow" battery, is specifically a 12V battery fitted to a 19-inch or 23-inch cabinet, with the pole and front terminals located on the upper side of the short front side in the same direction as the battery, which is nearly 19 inches or 23 inches wide in shape.

Front terminal battery's basic principle and structure was similar to 2 v battery, the difference is the front terminal put 6 batteries with the same capacity and 2 v battery monomer series together, placed within the battery shell has six battery slot, this structure makes the front terminal type battery is long and narrow structure and cell aspect ratio is 3.4:5, the surface area increases, this makes the front terminal battery has good heat dissipation performance, greatly reducing the possibility of thermal runaway battery, and the front terminal batteries in the battery front terminal is used to design external connections, wiring position first half of the battery connection is convenient.

Front terminal battery can effectively reduce the long and narrow front terminal type battery monomer structure in series process implementation difficulty, improve monomer welding area and quality, improve more monomer structure inside the battery in series between the battery tank, battery cover and, in the form of sealing way between process combined with the reliability, stability, ensure the product performance, implementation of cleaner production, etc.

When the front terminal battery is installed vertically, there can be no maintenance space between the layers, which can not only save the machine room area, but also make the installation and maintenance of the battery very simple. The front terminal battery has more advantages than the 2V battery in terms of energy saving and emission reduction, manufacturing cost, product standardization and installation control.

Therefore, front-end terminal batteries are widely used in the field of communication power supply in the world. Meanwhile, front-end terminal batteries are often used in the following fields:

UPS(uninterruptible power supply)

Marine equipment

Telecommunications equipment

Engine start

Emergency lighting control equipment

Fire and safety systems

Computer, power switching system

Microprocessor-based office machines

Wind and solar power systems

KIJO is a leading front terminal battery manufacturer & supplier in China, please contact us!

KIJO battery Group is a professional storage battery manufacturer, we provide flooded lead acid battery vs agm, china storage battery, agm storage and etc. Want to know where to buy agm deep cycle batteries or more? Please contact us.


Send product request

To: Jiangxi JingJiu Power Science& Technology Co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Siliver Fish 52V Lithium Battery
Siliver Fish 52V Lithium Battery Specification of Siliver Fish 52v 20ah lithium battery Battery Model Rate Voltage(V) Rate Capacity(AH/10Hr) Dimension(mm) ...
FRONT TERMINAL BATTERY
FRONT TERMINAL BATTERY Type of Front Terminal Battery Front Terminal AGM Battery The front terminal AGM batteryis designed for telecommunications applications with ...
24V Lithium ion Battery
24V Lithium ion Battery Contact us to buy 24v rechargeable lithium ion battery. Rechargeable 24v lithium ionbatteriesfor sale. 24 Lithium Ion Battery Specification of...
25.2V Lithium ion Battery
25.2V Lithium ion Battery KIJO as a storage battery manufacturermainly provides 25.2 v lithium batteryas well as power supply battery. Specification of 25.2V Lithium ion ...
3.2V Lithium ion Battery
3.2V Lithium ion Battery Founded in 1993, KIJO batteryGroup is a professional storage battery manufacturerintegrating science, industry and trade. KIJO has a production cap...
All supplier products

Same products

Nitrile Gloves Factory
Nitrile Gloves Factory Seller: Suzhou Texnet CO., LTD. Suzhou TEXNET Co., Ltd. provides nitrile glove solutions designed for medical, laboratory, health...
Preform Mould
Preform Mould Seller: Taizhou Qihong Mold Co., Ltd. Taizhou Qihong Mold Co., Ltd. specializes in developing and producing Preform Mould solutions for...
Nozzle Sprayer  Nozzle Sprayer
Nozzle Sprayer Nozzle Sprayer Seller: zhonglutong Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer DLLA133P814 Nozzle...
Nozzle Sprayer 0 433 175 568 Nozzle Sprayer
Nozzle Sprayer 0 433 175 568 Nozzle Sprayer Seller: zhonglutong Nozzle Sprayer 0 433 175 568 Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer 8N...
Nozzle Sprayer DLLA150P2574 Nozzle Sprayer 0 433 175 431
Nozzle Sprayer DLLA150P2574 Nozzle Sprayer 0 433 175 431 Seller: zhonglutong Nozzle Sprayer DLLA150P2574 Nozzle Sprayer 0 433 175 431 Nozzle Sprayer 0 433 175 461 Nozzle Spra...