Control Circuit Board
The name of a circuit control boardis as below:
Ceramic circuit board, alumina ceramic circuit board, aluminium nitride ceramic circuit board, circuit board, PCB, aluminium substrate, high-frequency board, thick copper board, impedance board, PCB, ultra-thin circuit board, ultra-thin circuit board, printing (copper etching technology) circuit board, etc. And we generate plenty of control board cooperated with other corporations, such as siemens factory automation company.
The circuit board makes the circuit miniaturized and intuitive and plays an important role in the mass production of the fixed circuit and the optimization of the layout of electrical appliances, making an optimum personal computer matched with our industrial display screen.
The pcb control panelis the most active industry in the modern industrial control components field. From the development form, the circuit board industry continues to high-speed growth as the industry grows, it is gradually optimized and improved.
Types of Control Circuit Board
Different Types of Control Circuit Board
The circuit board system is classified into the following three types:
Single-sided control circuit board
On the most basic PCB, the parts are concentrated on one side and the wires are concentrated on the other. Because the wires only appear on one side, the PCB is called a single-sided control circuit board.
Double-sided control circuit board
When single-layer wiring can not meet the needs of electronic products, it is necessary to use a double panel. Both sides are copper-clad and routed, and the wires between the two layers can be routed through holes to form the required network connection.
Multi-sided control circuit board
A multi-sided control circuit board refers to a printed board with more than three layers of conductive pattern layer and the insulation material between them, and the conductive pattern of the interconnect according to the requirements. The multi-sided control circuit board is the product of electronic information technology to high speed, multi-function, large capacity, small volume, thin, the lightweight direction of development.
How to Make a Control Circuit Board?
Firstly, deciding the number of layers and the size of the circuit board. The starting point is very important if you really want to make a perfect control circuit board.
Secondly, determining the type of control circuit board you are going to make. The style of mounting holes and passives design are also finished in this step.
Thirdly, preparing the board for the part. The step of choosing the components is continuous until the routing is finished.
Fourthly, the layout of the control circuit board is completed, the bare board is etched. Every hole is made using a laser drill.
Finally, washing and drying the control circuit board after the components are soldered onto the board is an automated process.
FAQs about Control Circuit Board
What does a control circuit board do?
The purpose of a control circuit board is to connect all the electronic parts of a device in a set space. These components are safely insulated by the control circuit board if they are connected with a power source.
Can a burnt control circuit board be repaired?
Yes, a burnt control circuit board can be repaired with a series of procedures and necessary tools. For example, the liquid epoxy repair material can even be colored, with color agents to replicate the color of the surrounding original board material.
What causes a control circuit board to burn out?
A control circuit board may burn due to poor protection. If the control circuit board connections are hooked up incorrectly or attached to the wrong type of power supply, it might burn out. Also, the confusing installation documents will lead to burn-out.
Viyork is a professional ac motor servo electrical manufacturers, we provide printed control board, plc circuit board, volume control circuit board, industrial automation control products, etc.
Send product request
Other supplier products
 |
Fanuc Servo Drive A06B-6079-H208 | Specifications of Fanuc Servo Drive A06B 6079 H208 Brand Fanuc Type Servo Drive Model A06B-6079-H208 ... |
 |
ABB Inverter ACS880-01-361A-5 | General Information of ABB Inverter ACS88001361A5 Global Commercial Alias: ACS880-01-361A-5 Product ID: 3AUA000008221... |
 |
AC Servo Motor | Since the 1980s, With the development of integrated circuits, power electronics, AC variable speed drive technology, the permanent magnet AC servo ... |
 |
Switch | A switch is an electronic device that turns on or off the circuit or causes it to flow to another circuit. The most common switch is a human-operat... |
 |
Industrial Automation Products For ABB | ABB Group was formed in 1988 by the merger of ASEA and BBC Brown Boveri that is an electrical engineering group with worldwide operations. ABB i... |
Same products
 |
flask | Seller: PakGent Bioscience (Suzhou) Co., Ltd. | Fit tips, DNase/RNase free, sterile, rack pack（78mm） PakGent UFPT-1000R-L Low Retention 1000ul M... |
 |
Lesinurad | Seller: Lepu Medical Technology(Beijing)Co.,Ltd | Lesinurad *Product registration and availability vary by country. For more information on prod... |
 |
LEN503 Nebulizer | Seller: Lepu Medical Technology(Beijing)Co.,Ltd | Cute pet caring Small atomized particles nebulizer machine for kids Adjustable atomizing cup H... |
 |
SINOART Shanghai Co., Ltd. | Seller: SINOART Shanghai Co., Ltd. | SINOART Shanghai Co., Ltd. is a combined industrial & trading company in China, specializing ... |
 |
High Voltage Surge Arresters | Seller: Guangdong Yufeng Industries Co.,Ltd | High voltage surge arresters, also called lightning arresters, are electrical devices designed to... |
