Metal Seated Gate Valve
Features of Metal Seated Gate Valve
The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland bolts only need to be tightened;
Stem spherical stop-thrust, low friction resistance, so that the valve is light to open and close, low operating torque;
Major stem O-ring can be replaced with pressure in the pipe;
Epoxy resin sprayed on the inner and outer surface of the product, not easy to corrode.
Metal Seated Gate Valve Working Principle
Metal Seated gate valve vs resilient seatedgate valve, Usually both can be used on the water pipeline, reilient seated gate china valvemore for clean water pipeline, because the granular medium will cause damage to the rubber of the gate, while the metal seated gate valve is more widely used, the hardness of the bronze seat makes in the granular medium can also be very good to achieve the sealing effect and service life will not be greatly affected. But the metal seated gate valve production cycle is longer, the use of higher costs, so the choice between the two or according to the working conditions of the media conditions and budget to choose.
Metal Seated Gate Valve Installation and Commissioning
Metal seated gate control valvein the pipeline does not require frequent maintenance, depending on the time of use, the stem O-ring can be replaced periodically to reduce the possibility of leakage. For specific use, please consult Zeco Valve Group.
Metal Seated Gate Valve Material and Standard
Size Range: 2"~64"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.5, AS4087, EN1092-2
Coating: WRAS approved Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron/ Cast Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron/ Cast Iron |
EN 1563/DIN 1693 |
|
Trim |
Ductile Iron/ Cast Iron |
EN 1563/DIN 1693 |
|
Seat |
Bronze/Brass |
ASTM B62/ ASTM B148 |
|
O-ring |
EPDM / NBR |
ISO 4633 |
|
For materials options not listed, consult factory. Zeco manufactures valves in more than 50 different alloys. |
||
Send product request
Other supplier products
| Stainless Steel Gate Valve | Description of Stainless SteelGate Valve: ZECO stainless steel gate valve is basically used for pipelines with corrosive media. For any kind of sta... | |
| 4 Inch Ball Valve | Description of 4 Inch Ball Valve: ZECO4 inch ball valveis also the most common batch products, which are mainly floating ball valves. Occasionally,... | |
| Resilient Seated Gate Valve | Features of resilient seated valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable d... | |
| Electric Butterfly Valve | Description of Electric Butterfly Valve: ZECO electric butterfly valve is named after electric actuator operated. Butterfly valve in the pipeline ... | |
| Manual Ball Valve | As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand... |
















