SFP 1.25G Tx1490/Rx1550 120Km LC Transceiver
Gearlink’s GCS9L0C45 SFP china transceiveris compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser), and the APD/TIA. The module data link up to 120km in 9/125um Single-mode fiber.
This transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional and bidi fiberoptical interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.
The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.
Get Free Quote
Technical Specification Of SFP 1.25G Tx1490/Rx1550 120Km LC Transceiver
General Specifications
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
|
Bit Rate |
BR |
Gb/sec |
|||
|
Max |
120 |
km |
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
||
|
Storage Temperature |
TS |
-40 |
85 |
ºC |
||
|
Storage Ambient Humidity |
HA |
5 |
95 |
% |
||
|
Power Supply Voltage |
VCC |
-0.5 |
4 |
V |
||
|
Signal Input Voltage |
-0.3 |
Vcc+0.3 |
V |
|||
|
Receiver Damage Threshold |
+3 |
dBm |
||||
|
Lead Soldering Temperature/Time |
Told |
260/10 |
ºC/sec |
Note 1 |
||
|
Lead Soldering Temperature/Time |
Told |
360/10 |
ºC/sec |
Note 2 |
Send product request
Other supplier products
 |
QSFP28 100G Copper Twinax Cable XM DAC | QSFP28 Direct Attach Cables (dac cable 100g) are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to... |
 |
SFP+ 10G 1550nm 40Km LC Transceiver | The SFP+ gbic 10gb 40kmtransceivers are high-performance, cost-effective modules supporting a data rate of 10Gbps and a 40km transmission distance ... |
 |
SFP 155M Tx1550/Rx1310 40Km LC Transceiver | The sfp bidirectional transceivers are high-performance, cost-effective modules supporting dual data-rate of 155Mbps and 40km transmission distance... |
 |
SFP 1.25G Tx1310/Rx1550 20Km LC Transceiver | SFP 1.25G Tx1310/Rx1550 20Km LC Transceiver is a product of SFP BIDI optical module series. BIDI optical module is an optical module using WDM (wav... |
 |
QSFP 40G 1310nm 10km MPO Transceiver | 40G QSFP 1310nm 10km MPO is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
