OPS-30 Optical CNC Probe System
OPS-30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is a compact 3D touch-trigger probe with optical signal transmission.Cnc xyz probe can be used for workpiece measuring. Optical transmission probeis widely applied. OPS-30 optical transmission probe system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on.
OPS-30 optical probe system with special cnc probe programmingcontains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is a compact 3D touch-trigger probe with optical signal transmission.Cnc xyz probecan be used for workpiece measuring. Optical transmission probe is widely applied. OPS-30 optical transmission probe system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on.
Parameter of OPS-30 Optical CNC Infrared Probe System
|
OP510： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
600±30（g） |
|
Trigger force in X-Y direction |
40-80g） |
|
Optical signal receiving/sending distance |
>5m |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
Seal grade |
IP68 |
|
OSI-20： |
|
|
Optical signal receiving/sending distance |
>5m |
|
Input voltage |
24±10% VDC |
|
Output load current |
50mA |
|
Length of the cable |
8m |
|
Length of the cable retaining tube |
2m |
|
Seal grade |
IP68 |
Optical Probing Application of OPS-30 Optical CNC Infrared Probe System
Optical probes are suitable for small and medium-sized milling machines and machining centers with automatic tool change.
Optical probe are used to set work-piece coordinate system and machining zero points
Optical probe are used to detect and control the key dimensions, position coordinates and their precision automatically between two processes
Technology of OPS-30 Optical Transmission Probe System
Probe switch on/off method:：Range on/off、M code on/off；
Infrared coded signals are used to transmit information between the probe and the receiver;
The transmitting distance of the probe signal can be adjusted by trigger probe with special program to set the receiver;
Output four kinds of SSR signals to machine control system when probe is in the states of trigger、error、probe batteries low and output pulse;
The OSI-20 receiver can change its logical state of the output signal by setting;
Double infrared signal receiving and transmitting devices are used to increase the reliability of the equipment;
The LED lights in the receiver show the working status of the probe system.
Pioneeris a professional probe manufacturer, we provide pioneer machine and tool, usb optical probe, cnc zero probe, cnc zero probe, homemade cnc 3d touch probe, machine probeand etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
Cable Tool Setter System | The electronic cable tool touch setter system is suitable for various specifications of machine centers, CNC milling machines, drilling-tapping mac... |
 |
Problems That Should Be Paid Attention to when Calibrating the Touch Trigger Probe | touch triggerprobe is smaller than the static diameter After learning about the principle of probe calibration, we can easily explain why th... |
 |
CNC Machine Tool Setter System | Tool setter for CNC machining centersis an important operation procedure in CNC machining, and length tool setter's accuracy will directly affect t... |
 |
Cable Tool Setter System | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradu... |
 |
CNC Machine Tool Touch Probe System | Pioneer touch probes for CNC machines can measure and find the base position of the workpiece quickly and accurately, set or modify the workpiece c... |
Same products
 |
Pipe clamp | Seller: Yuhuan Jinyi Hardware Co., Ltd. | It is designed for secure and stable installation of various pipe systems. Featuring a robust two... |
 |
Automotive nozzles 0 433 175 510 Automotive nozzles 0433171654 | Seller: zhonglutong | Automotive nozzles 0 433 175 510 Automotive nozzles 0433171654 Automotive nozzles 0433171719 Auto... |
 |
Automotive nozzles 0 433 175 470 Automotive nozzles 0 433 175 481 | Seller: zhonglutong | Automotive nozzles 0 433 175 470 Automotive nozzles 0 433 175 481 Automotive nozzles 0 433 175 51... |
 |
Automotive nozzles 0 433 175 395 Automotive nozzles 0 433 175 413 | Seller: zhonglutong | Automotive nozzles 0 433 175 395 Automotive nozzles 0 433 175 413 Automotive nozzles 0 433 175 42... |
 |
Automotive nozzles 0 433 175 294 Automotive nozzles 0 433 175 333 | Seller: zhonglutong | Automotive nozzles 0 433 175 294 Automotive nozzles 0 433 175 333 Automotive nozzles 0 433 175 36... |
