AUTO EVA 12 AUTOMATED PARALLEL NITROGEN EVAPORATOR
RayKol Auto EVA 12 is a nitrogen blow-down automated evaporation system that provides automated evaporation of up to 12 samples in parallel with endpoint detection. This automated evaporation systemuses vortex airflow generated from stable angled nitrogen blow, to constantly disturb the sample surface and lower its vapor pressure in order to gain gently rapid evaporation under water bath heating. Each sample position is equipped with optical sensor to precisely determine endpoint of concentration. User can have real-time monitoring to whole process through built-in touch screen, make it easier to access and observe.
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM FEATURES
Batch processing, simultaneous evaporation of up to 12 samples in parallel
Rapid concentration under water bath and nitrogen blowing
Transparent sink design for observation
Good compatibility with various sample vials and ajustable blowing angle
Automatic endpoint detection to avoid over-drying
Sprinkle rinsing to sample vials to maximize recovery rate
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM SPECIFICATIONS
|
Parameter |
Specification |
|
Concentration |
Water bath heating and nitrogen blowing |
|
Sample capacity |
12 |
|
Range of concentration temperature |
Room temperature to 60°C |
|
Sample vials |
65mL, 260mL; glass tube with stems |
|
Endpoint detection |
|
|
Range of gas flow rate |
0 to 5.0mL/min, precise to 0.1mL/min |
|
Software interface |
10-inch built-in screen |
|
Dimension |
58cm x 46cm x 56cm |
|
Weight |
41kg |
|
Power supply |
200 to 240V, 50/60Hz |
|
Power rate |
1500W |
|
Fume hood/ventilation |
Required |
|
Storage temperature |
0 to 40°C |
|
Storage humidity |
20 to 85% |
|
Operating temperature |
10 to 40°C |
|
Operating humidity |
20 to 80% |
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM APPLICATIONS
Auto EVA 12 Automated evaporation system is designed for large-volume concentration for sample batches, typically used to evaporate extracts of soil and water samples from evironment, azo dye from textiles, fat and acid value from fried foods, as well as residues of pesticides and veternary drugs. It can be applicable in types of analysis such as:
Soil and sediment - Determination of organochlorine pesticides - GC/MS
Solid waste - Determination of polychlorinated biphenyls - GCMS
Textiles ― Determination of the banned azo colourants
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM BENIFITS
Large sample capacity: each batch can accommodate max. 12 samples, flexible in 65mL and 260mL sample tubes, with endpoint detection.
Gradient nitrogen blowdown: achieve by controlling flow rate of nitrogen gas to increase gradually with time, to ensure efficient evaporation.
Adjustable blowdown angle: optimize the shear vortex action by adjust the angle of the needles pointing, to ensure efficient evaporation.
Sprinkle rinsing: optional configuration of rinising module can boost up the recovery rate of target analytes by flushing back the evaporated analytes.
Automatic water refill: Software control water in and out, with water level sensor to detect endpoint of refill and drain the water bath, to keep it hygiene and clean.
As a reliable automated lab systemsmanufacturer, we can offer kinds of automated lab equipmentfor sale, anything you need, please contact us.
Send product request
Other supplier products
 |
RAYCURE SPE COLUMNS | RayCure SPE series provide pre-packed SPE columns with a variety of sorbents, resins and cartridge size for various methods and target analytes. Th... |
 |
ASPE ULTRA AUTOMATED SOLID PHASE EXTRACTION SYSTEM | ASPE Ultra series Automated Solid Phase System is an automated sample preparation system designed for analysis of organic substances in water sampl... |
 |
RAYCURE QUECHERS CLEAN-UP KITS | RayCure QuEChERS Clean-up kits are used in the step of purification with salts in QuEChERS procedure, to separate target compounds from interferenc... |
 |
NITROGEN EVAPORATION | As one ofprofessional and experienced nitrogen evaporator suppliers, RayKol Automated nitrogen evaporation systemis specialized in simultaneous and... |
 |
AUTO EXTRA D10 AUTOMATED SOLID PHASE EXTRACTION SYSTEM | Auto Extra D10 Automated solid phase extraction discsis an automated sample pre-treatment instrument specialized in handling water samples for dete... |
Same products
 |
MEGA M-PR 3.1 ბლოკის და ბეტონის ქვაფენილის საწარმოო დანადგარის კომპლექტი | Seller: VBM GLOBAL | |
 |
Micronized wax used for significantly improving wear resistance | Seller: Syntop chemical Co.,Ltd. | Micro-powdered wax is a micron-sized wax powder additive primarily used to improve surface proper... |
 |
450ml Nanzhu Bamboo Coffee Handle Mug | Seller: 865087 | The 450ml Nanzhu Bamboo Coffee Handle Mug from Yongkang Aijun Industry & Trade Co., Ltd. comb... |
 |
Custom Two Shot Mold | Seller: WIT MOLD LIMITED | Custom Two Shot Mold 2K injection molding, also known as two-shot injection molding, is a re... |
 |
Automotive Plastic Parts Manufacturer | Seller: WIT MOLD LIMITED | Automotive Plastic Parts Manufacturer As an experienced Manufacturer, WIT MOLD designs and p... |
