XLNT-3000 3000W Fiber Laser Cutter Chiller
XLNT-3000 3000W Fiber laser cutter chilleris suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode, which can cool the fiber laser generator and QBH connector at the same time. It has an ultra-high temperature control accuracy of ±0.3°C. It is also equipped with professional water filtration and purification equipment, which truly realizes a machine with multiple uses, environmental protection and energy-saving.
Advantage Of XLNT-3000 3000W Fiber Laser Cutter Cooling System
The cooling capacity is 8500W.
It is equipped with protection functions such as flow alarm, high-temperature water alarm and low-temperature water alarm.
The industrial water cooled chillers are equipped with a deionizing filter to ensure the cleanliness of the laser cooling water circuit.
There are multiple fault detections inside to protect the laser in a normal state, and a signal output port is also equipped.
Specification Of XLNT-3000 3000W FiberCo2 Laser Water Chiller
|
Voltage |
220v |
|
|
Frequency |
50hz |
60hz |
|
Current |
4A-17.3A |
|
|
Compressor power |
||
|
Cooling capacity |
24566Btu/h |
23884Btu/h |
|
6192kcal/h |
6020kcal/h |
|
|
Electric assisted power |
400W+1800W |
|
|
Refrigerant |
R-22/R410A |
|
|
Precision |
±0.5℃ |
|
|
Reducer |
Capillary |
|
|
Protection |
Over-current protection for compressor, flow alarm, over-temperature alarm |
|
|
Pump power |
||
|
Tank capacity |
40L |
|
|
Inlet and outlet |
Rp1/2'' + Rp1'' |
|
|
53M |
||
|
70L/MIN |
||
|
95KGS |
||
|
113KGS |
||
|
Product dimension |
78*47*89CM(L*W*H) |
|
|
Packing dimension |
87*60*109CM(L*W*H) |
|
Application Of XLNT-3000 3000W Fiber Laser Cutter Chiller
This chiller for laser machine is suitable for 2000W~3000W fiber laser equipment.
More Details Of XLNT-3000 3000W Fiber Laser Cutter Chiller
On-top Cooling Fan, Ultra-quiet
The Side Panel Wind Tunnel Design, Detachable, Helps Heat Dissipation In All Directions
Equipped With High And Low Temperature Dual Protection
If you are looking for a professional industrial chiller manufacturer, please contact us, and we will be your best partner.
Send product request
Other supplier products
 |
Xintchillers Products For Your Needs | Xintchillers is a professional manufacturer in the water chiller industry and fume extractorindustry. Our products include Industrial water chill... |
 |
CW5000 80W-100W Co2 Small Chiller | CW5000 co2 chillers is suitable for cooling the laser tube of 80-100W co2 laser machine. CW5000 equipped with 800W cooling capacity compressor can ... |
 |
WRC-300 10L Tig Welder Cooler | Wrc30010L TIG welder cooler is a circulating cooling equipment with water tank capacity of 10L and maximum head of water pump of 30m. It is mainly ... |
 |
Fume Extractor | Fume extractor is a kind of mobile industrial dust purifier equipment, which is mainly used to purify the smoke and exhaust gas that are harmful ... |
 |
Welding Fume Extractor | Welding Laser Fume Extractor The welding fume extractoris mainly used to purify the harmful fume and gas generated during metal welding. Welding f... |
Same products
 |
Cold Glaze Stabilizer (Glazemate) | Seller: Marine Hydrocolloids | Meron’s Cold Glaze Stabilizer Glazemate, a ready to use Neutral Cold Glaze Stabiliser, whic... |
 |
Pectin | Seller: Marine Hydrocolloids | Meron Pectin is a structural polysaccharide of the cell wall of plants, Commercial pectin is comm... |
 |
Milk Shake Stabilizer | Seller: Marine Hydrocolloids | Meron’s Milk Shake StabilizerOur Milkshake Stabilizer has been designed to provide creamy m... |
 |
Flavoured Milk Stabilizer | Seller: Marine Hydrocolloids | Meron’s Flavoured Milk StabilizerFlavoured milk drinks are sweetened dairy drinks, typicall... |
 |
Ice Cream Stabilizer | Seller: Marine Hydrocolloids | Meron’s IceCream Stabilizer is a 100% vegan blend developed to not only enhance the texture... |
