Car seat belt fixed point test bench
Applicable standards:
National mandatory standards:
GB 15083-2006 "Automobile seats, seat fixtures and headrests strength requirements and test methods"
GB 14167-2006/2013 "Car Seat Belt installation Fixed Point"
GB 11550-2009 "Automobile seat headrest strength requirements and test methods"
GB 13057-2003/2014 "Strength of passenger seats and their vehicle fasteners"
GB 14166-2013 "Seat belt, restraint system, Child restraint System for Motor Vehicle Occupants ISOFIX Child Restraint System"
International Standards and regulations:
Eu ECE R14 Uniform Regulation on the approval of Vehicles with regard to seat belt fixing Points
Eu ECE R17 Uniform Regulation on the approval of vehicles with regard to seats, seat fixation points and headrests
Eu ECE R80 （specific terms may vary from version to version）
FMVSS 207 Seating System
FMVSS 210 Seat Belt Assembly Fixing Point
FMVSS 225 Child Restraint System Fixed Point
Enterprise standard:
For example, the test requirements of the strength of the seat system and the strength of the seat belt fixing point in the EP development standard of the German Volkswagen company.
SAE J 384 Stationary Point Test Code for Seat Belts in Motor Vehicles
SAE J 385, Motor Vehicle Seat Belt fixed point performance requirements, etc.
Main parameters:
The main parameters of the car seat belt fixed point test bench may vary from model to model and manufacturer, but usually include the following aspects:
Load measuring range:
It is generally 030kN （multi-channel, such as 6 channels） or 015kN （less channel, such as 3 channels）。 This range can cover the strength test requirements of most car seat belt anchorage points.
Control accuracy:
For the force measurement control system of 0——30kN, when the measurement and control load is 5kN——30kN, the control accuracy is the standard value of ±200N; When the measurement and control load is 0——5kN, the control accuracy is the standard value ±100N.
For the 0-15kN force measurement control system, the control accuracy is similar, but the value is reduced.
Hydraulic cylinder number and load:
The number of hydraulic cylinders may vary depending on the design of the test stand, for example, a nine-channel test stand may be equipped with nine hydraulic cylinders.
The load capacity of each hydraulic cylinder also needs to meet the test requirements, such as the load capacity of 3T.
Travel and loading speed:
The stroke of the hydraulic cylinder is usually longer, such as 1000mm, to accommodate different sizes of seats and seat belt fixing points.
The loading speed can reach the pre-set output in a specified time, such as 2 seconds or less.
Loading force holding time:
The load force holding time can be adjusted according to the test requirements, such as 0.2s to 120s stepless.
Send product request
Other supplier products
 |
Dry fallen wadding tester G275 | G275 Dry fallen wadding tester, The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly app... |
 |
Impact strength tester for car seat launching headrest | Applicable standards: GB 11550-2009 "Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the ... |
 |
Fabric Negative-ion Concentration Tester | The negative ion generation tester is mainly used to detect the negative ion generation of textiles, and evaluate the negative ion generation capac... |
 |
Tube abrasion tester | Applicable standards: DB51/T 2450-2018: General technical specification for polyolefin composite wear-resistant pipes. This standard may put forwa... |
 |
Glow Wire Tester | Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
Same products
 |
Beeswax used for candle making | Seller: Syntop chemical Co.,Ltd. | The key advantages of beeswax candles lie primarily in their natural, healthy properties and high... |
 |
Bottle Blowing Machine | Seller: Taizhou Qihong Mold Co., Ltd. | Taizhou Qihong Mold Co., Ltd. offers Bottle Blowing Machines designed for efficient plastic bottl... |
 |
480ml corrosion-resistant transparent PET bottle | Seller: Suzhou Brotherpacking Plastic Co., Ltd. | This 480ml corrosion-resistant transparent PET bottle is ideal for packaging personal care produc... |
 |
a-peng太平鸟 mosaic | Seller: 成飞经理，15813639200：李老师 后面华兴玻璃厂 ，高速大丰田阿波罗 集美天成 | jaoisan i snxian xiang 1stfotr .sliay t love ? 2jian xiang qian all fors king stsan put hongdou... |
 |
soaali umisan 1st psn g A-peng tai[ping yihui niuao 1st 太平鸟 阿-鹏经理 阿波罗 | Seller: 成飞经理，15813639200：李老师 后面华兴玻璃厂 ，高速大丰田阿波罗 集美天成 | s哦爱你 osain lsaowo jyou li jhgoan psaeng wate laian hsi xingjing boadao soa nisan io2 naspau nsaia... |
