TROLLEY SHOT BLASTING MACHINE
Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the surface, removing of casting sand and filings, consolidating of the surface before coloring, etc. Trolley type shot blast cleaning machineis designed for shot blasting of large and heavy castings, complicated shapes in small series or single production. Working pieces are loaded to a rotating table on tip truck with lifting device (crane, lift truck). This rotating table is then transported in a chamber. In the entrance of this chamber are two-sided doors.
By means of handy lifts, the workpieces are loaded on the perforated rotating working table of the trolley, which then drives to the shot blasting chamber. It is recommended that the table surface is covered with the workpieces as much as possible. It normally works with the automatic switching-on, the shot blasting time is set by means of a program. During shot blasting the workpieces move on the rotating table through the jets of abrasive of throwing wheels, which are installed under different angles, enabling higher efficiency. Then the workpieces must be turned and repeat the shot-blasting process.
Application:
Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the surface, removing of casting sand and filings, consolidating of the surface before coloring, etc.
Sandblasting RoomBody
The wall of the sandblasting machinebody uses a noise attenuation sandwich panel with glass wool interlayer and abrasion-resistant rubber liner. The rubber liner also has the noise attenuation function.
Send product request
Other supplier products
 |
TROLLEY SHOT BLASTING MACHINE | Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the s... |
 |
Sandblasting Room | The sandblasting room designed by QINGGONG Machinery can complete a wide range of blasting jobs for those big and irregular workpieces. Traditional... |
 |
HYDRAULIC CNC TURRET PUNCHING MACHINE | The driving system of the Y30 series cnc hydraulic punching machine, with low noise, high speed, and high efficiency, and the thickness of the punc... |
 |
FLOOR SHOT BLASTER | Floor shot blaster is a kind of shot blasting machine for concrete floors, steel plates. The floor shot blaster can clean up the floatation and i... |
 |
Hydraulic CNC Turret Punching Machine | QINGGONG MACHINERY shot blasting machineoffers you an effective solution to deal with the surface of the workpieces, including remove the contamina... |
Same products
 |
Felt Polishing Wheel Drum | Seller: Keying Abrasives | The steel wool polishing wheelDrum is particularly suitable for polishing larger surfaces. The st... |
 |
7 Inch (180mm) Flap Disc | Seller: Keying Abrasives | KEYING manufactures Self-adhesive Disc, our production is about reprocessing jumbo rolls of SCM, ... |
 |
LEN503 Nebulizer | Seller: Lepu Medical Technology(Beijing)Co.,Ltd | Cute pet caring Small atomized particles nebulizer machine for kids Adjustable atomizing cup H... |
 |
SINOART Shanghai Co., Ltd. | Seller: SINOART Shanghai Co., Ltd. | SINOART Shanghai Co., Ltd. is a combined industrial & trading company in China, specializing ... |
 |
FPQ2W-10/3T20 10kV Pin Insulators | Seller: Guangdong Yufeng Industries Co.,Ltd | The crimping process of polymer pin type insulatorsshould pay attention to the crimping force, co... |
