SDS-05535 0.55mm Diameter 35mm Length Glued Steel Fiber
This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It also has good dispersion in concrete. which is widely used in industrial floors, high-way speed, ground, bridge and etc.
The Advantages of SDS 35mmLength Glued Hooked End Steel Fiber
Easier operation and improve structural strength;
High toughness and lower thickness and reduce steel reinforcement requirements;
Improve impact and abrasion resistance;
Less time used, and more economical;
Compared with traditional concrete, concrete with glued steel fiber is more economical and efficient.
Steel High Performance Fibres USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05535 0.55mm Diameter 35mm Length Glued Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
If you are looking for a reliable steel fiber supplier, don't hesitate to contact us!
Send product request
Other supplier products
 |
Steel Fiber Solutions | Concrete Fiber Solutions Steel Fibers For Crack Control The steel fiber has high tensile strength of 1000Mpa, which could ensure it will not be br... |
 |
SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber | Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber supplierspecializing in steel fiber production in China and ... |
 |
SDS Micro Copper Coated Steel Fiber | Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high ... |
 |
SDS Loose Hooked End Steel Fiber | Hooked end steel fiberwas made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance.... |
 |
Steel Fiber For Industrial Floors | Steel Fiber For Industrial Floors Steel fiber reinforced concrete industrial building ground There are many kinds of industrial building floors... |
Same products
 |
Optical Fiber Splicer | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | Splicing for fiber optic cablefor sale is mainly used for the construction and maintenance of opt... |
 |
Optical Fiber Patch Cord | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | A fiber patch cord 10 meteris also known as a fibre optic connector, it is a fibre optic cable eq... |
 |
Mechanical Optical Switch | Seller: Zhongshan Meisu Technolody Co.,Ltd | MEISU's Mechanical Optical Switch is driven by a relay to control the prism to turn, thus switch ... |
 |
Linear Fiber Array | Seller: Zhongshan Meisu Technolody Co.,Ltd | Products One dimensional linear fiber arrayis made by placing M / MM / PM fibers on a V-grooved ... |
 |
Lensed Fiber | Seller: Zhongshan Meisu Technolody Co.,Ltd | In some optical application, lens, reflector and other micro-optics components are normally neede... |
