SDS-1823 0.18-0.23mm Diameter 13±1mm Length Copper Micro Steel Fiber
Micro steel fiberare made of copper-coated steel wire. Micro steel fiber wireis one of most important material of RPC and UHPC.
UHPC has high strength, high toughness, very good durability and volume stability. This micro steel fiber is an excellent new building material. Micro filament steel fibers are currently widely used in high-speed railways, highways, RPC cover plates and UHPC buildings.
The Advantages of SDS MicroSteel Fiber
Good dispersion in concrete;
Less impact on UHPC liquidity;
Improving the toughness of concrete;
The brass fibers provides good impact, fatigue, shrinkage control and ductility in all grade concretes;
USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 120kg/㎥-200kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the evenly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-01823 0.18-0.23mm Diameter 13±1mm Length Micro Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
There are many concrete fiber manufacturers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber | This hooked steel fiberis a high-performance steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as ... |
 |
SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber | This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for gl... |
 |
Steel Fiber For Fatigue Resistance | Steel Fiber For Fatigue Resistance Fatigue resistance of cn steelfiber compared with ordinary concrete, the flexural and compressive fatigue pro... |
 |
Steel Fibers For Shotcrete | Steel fiber for shotcrete -SFRS Steel fiber reinforced shotcrete(SFRS-steel fiber reinforced shotcrete) is referred to as "steel shotcrete", which... |
 |
SDS Loose Hooked End Steel Fiber | Hooked end steel fibresare made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance... |
Same products
 |
High Borosilicate Heat-resistant Glass Water Cup Bamboo Thermos | Seller: 865087 | Yongkang Aijun Industry & Trade Co., Ltd. offers stylish drinkware designed for everyday conv... |
 |
4mm Composite Rubber Granules | Seller: Shijiazhuang Shuoruo Technology Co., Ltd | 4mm Composite Rubber Granules Composite elastic friction particles are made from a combinati... |
 |
Natural Cellulose Fiber | Seller: Shijiazhuang Shuoruo Technology Co., Ltd | Natural Cellulose Fiber Natural Cellulose Fiber are derived from plant fibers and primarily... |
 |
Friction material fillers and additives | Seller: Shijiazhuang Shuoruo Technology Co., Ltd | Friction material fillers and additives Friction material fillers and additives As a prof... |
 |
Metal Raw Material Supplier | Seller: Shijiazhuang Shuoruo Technology Co., Ltd | Metal Raw Material Supplier Metal raw materials As a professional Supplier, we specialize... |
