Self drilling bolt in surrounding rock of tunnels

Large quantity of engineering construction shows that broken rock mainly takes place in surrounding rock of tunnels, with the characters
of deformation and abruptness, it’s hard to deal with the problems exist in tunnel support of hard tunnel only by ,
especially in the hard tunnel at jointed fractured zone.
is one of supporting methods for projects and it is widely accepted in the world at the present stage. Its
supporting quality has direct relation to the stability of projects.
So after long-time construction experience, following requirements is necessary for self drilling anchor bolt.
1. Self drilling anchor bolt’s length, separation distance, array pitch, insertion direction and arrangement mode should accord with
construction demand.
2. Drill hole site should be confirmed and then adjust direction.
3. After drilling, self drilling anchor bolt should be installed in time according to its design and installation instruction.
4. Hole site, hole depth, hole diameter and accessories should be checked to reach specification.
5. The exposed length of self drilling anchor bolt should meet design requirement.
6. The direction of installation should be vertical with plate. Surface contact between plate and surrounding rocks should be tight and
avoid adding extra load on it.
7. Self drilling anchor bolt should not be bent during installation.
8. Inspection work of self drilling anchor bolt’s construction quality should be done.

Other supplier products

	Sinorock is committed to deliver “Total Solutions”of self drilling anchor	At Sinorock, we are an experienced distributor of many types of and other important products. With an expansive range covering over a dozen product...
	Sinorock injection anchors are a cost effective way to build a safe, lasting structure	The aim of ground support is to provide safe working conditions during the temporary construction activities and to give a sufficient long-term sta...
	For temporary works and foundations with Sinorock self drilling anchors	The ability of Sinorock to provide effective solutions without the need for additional casing operations enables designers, developers and contrac...
	Self drilling anchor of Sinorock provides a convenient and strong method for securely anchoring	We take pride in the fact that Sinorock are made on site here in our workshop in Luoyang,China. This allows us to oversee quality and standards at...
	Self drilling anchor bolt of Sinorock is good for projects	The importance of is pretty obvious. Without SDA bolts, most construction professionals and builders would find it real difficult to attach certai...

Same products

	Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series	Seller: Uratech USA Inc	TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
	Uratech Tool scoot cart for 50 taper tool holders	Seller: Uratech USA Inc	Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...
	3 in1 Decoiler Leveler Feeder	Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd.	3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f...
	NC Servo Feeder (0.1-3.0mm)	Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd.	NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of...
	Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage	Seller: Uratech USA Inc	TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool...