Drying Details of Fote Sludge Drying Machine
The drying process of slurry dryer can be classified into three stages. They are drying at high temperature, water draining at medium temperature and disposing at low temperature. With regard to the drying process at high temperature, it means to control the temperature at about 400℃-600℃. In this stage, a lot of water content in coal slime material are removed away by the rapid heat transfer between coal slime and drying medium.
Of course, the thermal value of coal slime do not change. For the water draining process at medium temperature, it works at the temperature varying from 200℃ to 400℃. During this process, the surface of coal slime do not be coked and the thermal value do not have any changes. As to the disposing process at low temperature, the temperature varies from 60℃ to 80℃ . And it is the last process.
All finished products are discharged out. Theworking process of sludge drying machineis over. The temperature change at the feeding mouth of coal slime dryer is very large. You can control the temperature according to the production situation. The temperature at the center area of sludge dryer should be more noticed. If the central temperature is too high, the temperature change at the air outlet will be much bigger due to the accumulated high temperature.
What’s worse, the temperature in the pipelines for heat transfer will continuously increase along with the operation of sludge drying machine. With regard to the surrounding temperature of rotary drum, you should timely deal if there are remains of hot air in the pipeline. Coal slime dryer supplier:
Send product request
Other supplier products
 |
Wonderful Features of Liquid Fuel for Slurry Dryer | As we all know, for fuels used to heating the coal slime dryer, most of them are in liquid. Then, for liquid fuels, they are generally the heavy oi... |
 |
Effort of FTM Crusher Company to Predict Risks | In the first three months of 2015, the national economy of China develops quite well. While, we need to realize that there still exist some unstabl... |
 |
Process to Record Parameter of Sawdust Pellet Mill | By taking the biomass pellets to make the durability test, you can check the carbon content inside. Besides, you should check whether the feeding p... |
 |
Working Principle of FTM Impact Crushing Machine | Among all crushers, impact crusher and cone crusher are mainly used for the secondary and tertiary crushing. While, in aspects of crushing principl... |
 |
Texture for Making Parts of Hammer Mill Crusher | Through the study for more than several years, FTM Crusher Company chooses to make the easy-wearing parts of hammer mill crusher with high manganes... |
