FORGED FLANGES
We are manufacture, supplier and exporter for a wide range of quality industrial forged steel pressure flanges including welding neck flange, slip-on flanges, socket weld flanges, blind flanges and other shapes for connection applications in the oil, gas, chemical, wind, pharmaceutical and other industries, manufactured in accordance with ASME , DIN, JIS, GB, ANSI, GOST, EN, BS and other engineering standards.
Pipe flange facing of america system, ring joint face except raised face, large or smalltongue face and groove face, large or smallmale face and female face, all can be manufactured according to standard.
Orifice flange equipped with orifice plate is used to measure the flow.Theere are two symmetrical, radial through holes in flange which is parallel to the sealed face.The distance to the sealed face is 0.94inch(23.9mm). They are equipped with two plugs of size NPT 1/2 mating the threaded hole in the outer end. The diameter of through holes as following.
Forged Flanges Type:
SW;WN;SO;BL;LJ;TH ; FF,RTJ
Forged Flanges Forming:
Forged
Forged Flanges Size:
1/2”—120”
Forged Flanges Standard:
GB9112~9124, GB13402, SH3406, HG20615~20623, HG20592~20605, JB74~90, ISO7005-I, ASME/ASNI B16.5/16.36/16.47A/16.47B, MSS SP44, JIS B2220-2001, DIN 2527/2636/2637/2638/2566/2576/2632/2633/2635/2642/2653/2655/2656, DIN2628/DIN2629, DIN2634 , BS 1560-3.1, BS4504-3.1, API 7S-15, API 7S-43, API 605, NFE 29-203 GOST12821 GOST 12820
Forged Flanges Rating:
ANSI 150LBS~2500LBS
DIN PN6~PN400
JIS 5K~30K
HG PN0.25~PN25
Forged Flanges Material:
Stainless Steel :
OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A182-F304, F304L, F304H, F316, F316L, F321, F321H, F347H, F317,
Super Stainless Steel:
ASTM A182-904L, 317, 317L
Duplex Steel:
ASTM A182-F51, F53, F44
Special Steel :
N06600, N08800, N08811
Alloy Steel:
16Mn, 12CrMo, 15Cr5Mo, Cr5Mo, 12Cr1MoV, ASTM A182-F11, F22, F91 F9 F5
Pipe Line:
ASTM A694-F42, F46, F48, F50, F52, F56, F60, F65, F70, F80
Carbon Steel :
ASTM A350-LF2, LF3 Q235A, 20#, ASTM A105
Tolerance of flange (ASME /ANSI standard)
Thread ,Socket-welding,Slip-on, Lap joint and Blind flange Tolerence |
Welding neck raised face flange tolerence |
||||
Outside Diameter |
≦24" |
±1.6mm |
Outside Diameter |
≦24" |
±1.6mm |
>24" |
±3.2mm |
>24" |
±3.2mm |
||
Inside Diameter |
Threaded |
Within limits on boring gauge |
Inside Diameter |
≦10” |
±0.8mm |
Socket-welding |
ID≦10"+0.8mm ID≧12"+1.6mm |
<20” |
±1.6mm |
||
Slip on |
≧20” |
-1.6mm +3.2mm |
|||
Lap joint |
Diameter of hu at base |
≦24” |
±1.6mm |
||
Outside Diameter of Hub |
≦5" |
+2.4mm -0.8mm |
>24” |
±3.2mm |
|
≧6" |
+ 4.0mm -0.8mm |
Diameter of hub at point of welding |
≦5" |
-0.8mm +2.4mm |
|
Diameter of contact face |
1/16”raised face |
±0.8mm |
≧6" |
-0.8mm +4.0mm |
|
1/4”raised face tongue&groove male,female |
±0.4mm |
Diameter of contact face |
1/16”raised face |
±0.8mm |
|
Diameter of counterbore |
Same as for inside diameter |
1/4”raised face tongue&groove male,female |
±0.4mm |
||
Drilling |
Bolt circle |
±1.6mm |
Drilling |
Bolt circle |
±1.6mm |
Bolt hole spacing |
±0.8mm |
Bolt hole spacing |
±0.8mm |
||
Eccentricity of bolt circle with respect to facing |
<2-1/2” Max 0.8mm ≧3” Max 1.6mm |
Eccentricity of bolt circle with respect to facing |
<2-1/2” Max 0.8mm ≧3” Max 1.6mm |
||
Eccentricity of bolt circle with respect to bore |
Max 0.8mm |
Eccentricity of bolt circle with respect to bore |
Max 0.8mm |
||
Eccentricity of facing with respect to bore |
Max 0.8mm |
Eccentricity of facing with respect to bore |
Max 0.8mm |
||
Thickness |
≦18” |
0-+3.2mm |
Thickness |
≦18” |
1-+3.2mm |
≧20” |
0-+4.8mm |
≧20” |
1-+4.8mm |
||
Length thru hub |
≦10” |
±1.6mm |
Length thru hub |
≦10” |
±1.6mm |
≧12” |
±1.6mm |
≧12” |
±1.6mm |
We are forged flanges manufacturer,we provide forged steel flanges,RFQ today.
Send product request
Other supplier products
Medical Tubing | Product description Medical Grade Stainless Steel TubingDescription Stainless steel medical tubes available as thin wall tubes in seamless or wel... | |
Bright Annealed Tubes | Bright Annealed Tubes Description Bright annealed stainless steel tubingis a kind of high precision steel tube material after finishing or cold ro... | |
Equal Tee | Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a ... | |
Aerospace Tubing | Similar Products Boiler Tubes Stainless steel tube manufacturer Huashang offers high quality boiler tubes for sale with very competitive factory ... | |
Lap Joint Flanges | Product description Lap Joint Flanges Features Forming: forged Stainless Steel Lap Joint Flange Lap Joint Flanges Materials Stainless Steel: OCr18N... |
Same products
3 Axis Glue Dispensing System Robot clutch dispensing Machine for Glue Epoxy Adhesive potting | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... | |
Automatic Glue Mixing and Potting Machine for LED driver | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... | |
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy dosing and dispenser potting machine | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... | |
Double Liquid AB Adhesive Dispenser Equipment | Seller: 824681 | Double Liquid ABAdhesiveDispenserEquipment AB glue meter mix dispensing machine/automatic glue ... | |
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... |