Grain Refiner
Grain Refiner
General Description of Grain Refiner
Grain refiner can optimize the form and grain distribution of eutectic silicon. The material synthetic mechanical properties, strength and ductility are enhanced. At same time, it can minimize hot cracking tendency.Control the structure and dispersion of individual crystals in metals improved mechanical strength and soundness of the casting.
SpecificationofGrain Refiner
|
Product |
composition |
Form |
|
|
AlTiC |
3% Titanium 0.15%C |
cut rod/coiled rod/cast cut bar/waffle ingot |
|
|
3% Titanium 0.3%C |
|||
|
5% Titanium 0.15%C |
|||
|
5% Titanium 0.3%C |
|||
|
AlTi |
AlTi |
4% 5% 6% 10% 15% Titanium |
Ingot/rod |
|
AlTiB |
AlTi10B1 |
10%Titanium 1%Boron |
Waffle ingot/rod/coil |
|
10%Titanium 0.4%Boron |
|||
|
AlTi5B1 |
5%Titanium 1%Boron |
||
|
5% Titanium 0.2% Boron |
|||
|
5% Titanium 0.6% Boron |
|||
|
AlTi3B1 |
3% Titanium 1% Boron |
||
|
3% Titanium 0.4% Boron |
|||
|
3% Titanium 0.2% Boron |
|||
|
AlP |
4%P |
waffle ingot |
|
|
AlZr |
4% 5 % 6%10%15%Zr |
waffle ingot |
|
|
AlSb |
5%/10%Sb |
waffle ingot |
|
Advantage of Grain Refiner
Improve the strength and toughness of aluminum alloy.
Eliminate columnar grains and feathery grains.
Improve the intrinsic quality of aluminum products by reducing the internal shrinkage cavities, porosity, hot cracking and segregation.
Increase more flexibility during the plastic deformation of the subsequent processing in the casting by improving its ductility
Reduce surface defects of aluminum product by improving its ductility.
Improve calendaring rate and productivity on the premise of ensuring the quality of products.
Increase the using time of the calendaring molds and auxiliary equipment on the premise of ensuring the quality of products.
Make the grainrefiner foraluminummore beautiful by improving the surface treatment of aluminum product
Application of Grain Refiner
Hardeners: Used for enhancing physical and mechanical properties of metal alloys.
Grain Refiners: Used for controlling the dispersion of individual crystals in metals to produce a finer and more uniform grain structure; grain refiners in aluminum alloy castings
Modifiers & Special Alloys: Typically used to increase strength, ductility and machinability.
Using method of Grain Refiner
Baking before using
Operation temperature 680-720 ℃
Joint quantity: Self controlled by calculation and test according to actual condition.
Joint method: After digging up the drum. Plunge the additives slightly to the Al liquid and mix evenly. Keep immersing for 5-10 minutes.
Storage of Grain Refiner
If stored in low humidity environment in the original packing, product can be preserved for a long time.
Send product request
Other supplier products
 |
Recovery Flux | Recovery Flux (SATA-PF-320) General Description of Recovery Flux (SATA-PF-320) SATA Powder Fluxes for Recoveryis a kind of flux used flux for recov... |
 |
Reclaimed Fluxes | General Description of Reclaimed Fluxes Reclaimed fluxes is a strongly exothermic flux and used as covering and drossing flux, recovery of grindin... |
 |
Fluxes for Aluminum Alloy | What is Na free flux? Aluminum is one of the lightest metals in the world. It’s also very strong, extremely flexible and corrosion resistant.... |
 |
Fluxes for Aluminum Alloy | Granular FluxGeneral Introduction: SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chlor... |
 |
Powder Refining Flux | Powder Refining Flux (SATA-PF-330) General Description of Powder Refining Flux (SATA-PF-330) For aluminium alloys, since the Al has strong chemical... |
