PANEL ROLL FORMING MACHINE
Overview of deck roll forming machine
The color plate produced by discharging, forming and post-forming cutting has a flat appearance, uniform paint, high strength and durability. Good metaldeckrollformingmachineis the key to good plate production. The colored steel plate enters the forming part of the roller table, and after molding, it is pressed into the pressed part, and is pressed into a section of equal distance, and the cutter is responsible for the fixed length cutting.
Widely used in industrial and civil buildings, such as factories, warehouses, stadiums, exhibition halls, theaters and other rooms and walls.
Design and Characteristics of panel forming machines
The arc part of the track is the core part of the slide rail. The arc position after the first few press forming, when the vertical pass is rolled up, the formed arc should be formed, and the effective tube bundle protection is carried out by the upper and lower rolls or the horizontal wheel. Otherwise, the arc position of the material will change during the stretching process, R becomes smaller and becomes a triangle, the steel ball is not in the end, the two points contact the sound, and when the R becomes large, the matching rail is swayed, and the track is blurred when used. Uneven force, deformation of the slide rail, shortening the life.
The average force principle of each pass, the average roller of the whole line is subjected to the average force, the wear is balanced, and the service life of the roll is extended.
For floor deck roll forming machine, the problem of rolling stability is often encountered in production. In fact, the single roller group is asymmetric, the left side is stressed, and the material is skewed to the right; the right side is strong, and the material is deflected to the left.
The C12MoV material adopts its wear resistance, but the specific strength and hardness are contradictory. When heat treatment, the red hardness of C12MoV should be utilized. After quenching, two or even three times of tempering can reach the hardness.
BOSJ is a professional china roll forming machine manufacturer,we provides china cold roll forming machine, guardrail forming machine, steel deck roll forming machine, floor deck forming machine, metal roll forming machines for saleand etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
GALVANIZED STEEL SILO UPRIGHT DOUBLE LAYER ROLL FORMING MACHINEE | The development of Steel Silo Roll Forming Machineand steel silo has a history of more than 100 years, from riveting warehouse, welding warehouse, ... |
 |
PROFILE ROLL FORMING MACHINE | The steel profile roll forming machinemainly consists of four parts: The first is the input section - in this section, the material is loaded at... |
 |
STANDING SEAM ROLL FORMING MACHINE | With the gradual increase of cold rolling capacity, the consumption of rolls (including work rolls, support rolls and intermediate rolls, etc.) and... |
 |
PIPE ROLL FORMING MACHINE | The pipe roll forming machineis a high-quality, high-efficiency rounding device for winding carbon steel, stainless steel and non-ferrous metal pro... |
 |
C PURLIN ROLL FORMING MACHINE | Purlins are rolled forms of flat steel sheets ranging between 1mm and 3mm steel. They are used for building the roofs and walls to support the deck... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
