FW INVERTING CENTRIFUGE
When the drum is under high-speed operation, the suspension enters the drum through the feeding pipe. Under the action of centrifugal force, the suspension is evenly distributed in the filter cloth of the drum. The liquid phase passes through the pore of filter cloth, the gap of screen mesh, and the filter hole of the drum and then is discharged from the outlet of the mother liquid pipe; while the solid phase is intercepted to form a ring filter slag layer on the filter mesh. When discharging, the main engine of inverting centrifugefirst slows down to the discharging speed, then starts the discharging motor and pushes the pusher out of the drum. Because the two ends of the filter cloth turn over, and the retained material is turned to the outside of the filter cloth.
FW INVERTING CENTRIFUGE CHARACTERISTICS
FW INVERTING FILTER CENTRIFUGEWORKING PRINCIPLE
After the start-up of the equipment, firstly judge whether the proximity switch of the motor end is effective or not. If not effective, the assist motor will work to seal the drum. After that, the assist motor will stop and the main motor start to run. After the drum reaches the set speed, the feeding valve will open and suspension will enter into the full-speed rotary drum filtration through the feeding pipe. Under centrifugal force, the solid of the suspension will be distributed evenly on the internal surface of the filter mesh and most of the liquid will pass through the small holes on the filter mesh and drum wall and be drained outside through the liquid outlet. After a long time operation, the thickness of the solid product inside the drum will keep gaining. When reaching the set time, the feeding valve will close automatically. (feeding time will be changed for different products and can be adjusted at first commissioning).
FW Performance and Use
FW series are inverting filter centrifuges with intermittent feeding and intermittent discharging.
Feeding, separating, washing, dehydration, and other operating procedures are completed under full speed; discharging is completed under the condition of deceleration, which avoids material contact with subject other than equipment, and can protect the operator and material from pollution as well.
The machine meets GMP specifications and is suitable for filtration and separation in pharmaceutical, food, and chemical industries
Saideli, as an excellent industrial centrifuge machine manufacturer, offers a wide range of industrial centrifuge machinefor you to choose from.
Send product request
Other supplier products
 |
INDUSTRIAL CENTRIFUGE MANUFACTURER | As one ofprofessional industrial centrifuge suppliers, Saideli provides high-quality lab centrifuge and centrifuge machine industrialwith a larger ... |
 |
HORIZONTAL CENTRIFUGE MACHINE | The horizontal centrifuge machine manufactured by Saideli is with high production capacity and separation performance is excellent. The horizontal ... |
 |
GKH AUTOMATIC SIPHON HORIZONTAL SCRAPER CENTRIFUGE | This screen centrifuge is controlled by PLC and regulates the speed by frequency convertor. The braking system of continuous centrifuge applies dyn... |
 |
LLGZ PULL BAG SCRAPER BOTTOM DISCHARGE CENTRIFUGE | L(P)LGZ vertical basket centrifuges are suitable for solid-liquid separation of fibroid products as well as suspension which contains fine grains a... |
 |
GKF AUTOMATIC HORIZONTAL SCRAPER CENTRIFUGE | Saideli GK(F) series automatic scraper centrifuge is mainly used in solid-liquid separation of raw materials, intermediates and end products in the... |
Same products
 |
Chinese GT-DG250 Rolling Machine | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-DG250 Rolling machine uses a pair of rolling assemble on the machine, and with ... |
 |
Double Spindle Lathe NL251D | Seller: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | Seller: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
