HYDRAULIC CONTROL VALVE
As hydraulic irrigation valve, the drip irrigation flow control valveis actually similar to the pressure reducing valve. The sprinkler control valve mainly protects against the phenomenon of water hammer in the pipeline. It is generally installed at the beginning of the pipeline to control the water pressure of the pipeline to prevent the problem of water hammer. Commonly used drip irrigation systemcontrol valve structures are spring type, lever type and open type. How to choose depends on the pipeline water pressure range and size.
Manual Control Valve
Installed with main valve and 3-way control valve to be open/close controlling valve, easy to operate.
Size: 2" (Dn50), 3 (Dn80), 4" (Dn100).
Connection: Threaded / Flange.
Control Valve with Plus Solenoid Valve
Installed with main valve and solenoid to be open/ close controlling valve, distance operation by electrical signal.
Size: 2”(Dn50), 3”(Dn80), 4" (Dn100)
Electric Voltage: 24VAC(DC)/ 12VDC Latching
Valve Type: NC (Normally Closed) / NO (Normally Open), with 3 position 2 way
Connection: Threaded / Flange.
Pressure Sustaining Valve:
Installed with main valve, pilot and 3-way control valve to be pressure sustaining system. Remaining the ablove filter system to have enough pressure to flush when the filter system is in self-cleaning.
Size: 2”(Dn50), 3”(Dn80), 4”(Dn100).
Pressure Adjusting Range: 0.8-6.5bar (11-95psi).
Connection: Threaded / Flange.
Pressure Relief Valve:
Install with main valve, pressure relief pilot and 3-way control valve to be pressure relief system. Fixed after pump set or pressure relief valve for irrigation system, and open immediately release the pressure when pressure in system is too high.
Size: 2”(Dn50), 3" (Dn80), 4" (Dn100)，
Pressure Adjusting Range: 1.0-10bar (15-155ps).
Connection:Threaded / Flange
Level Control Valve:
Installed with main valve, float and 3-way control valve to be level controlling system. This valve can adjust the level of water pool in same location automatically although the flowing is changed constantly.
Size: 2” (Dn50), 3”(Dn80)，4”(Dn100).
Connection: Threaded / Flange
As one of irrigation system manufacturers, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
Camlock Coupling | camlock fitting typesCam & groove coupling is very easy to use. In general, camlock coupling has two kinds of adapter: male and female. You jus... |
 |
Hose Fittings | Brass Camlock Coupling Introduction of Brass Camlock Fittings Brass camlock fittings or known brass camlock couplingare made of brass casting w... |
 |
KC Nipple | King Combination Nipples, also known as KC Nipples, are hose nipple fittings made from seamless steel pipe to connect hose. The PVCking nipplemakes... |
 |
PVC/Nitrile Layflat Hose | SUZHOU SEAPEAK CO., LTD..is one of the most professional pvc hose pipe suppliers, and we focus on producing high quality flat pvc tubing. Tube and... |
 |
Hose Fittings | Hose Mender Material: Steel, SS304, SS316, aluminum. Size: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 21/2", 3", 4", 5", 6", 8", 10", 12". The work... |
Same products
 |
Air-Cooled Water-Cooled Drum Cooler Machine | Seller: Hebei Guoning Heavy Industry Manufacturing Co., Lt | Air-Cooled Water-Cooled Drum Cooler Machine TheFoundry Sand Drum Coolerby Guoning is a high-perf... |
 |
Voc tail gas treatment equipment For Lost Foam Casting | Seller: Hebei Guoning Heavy Industry Manufacturing Co., Lt | Voc tail gas treatment equipment For Lost Foam Casting TheVOC Exhaust Gas Treatment SystemforLos... |
|
|
Airbag 3D vibration table | Seller: Hebei Guoning Heavy Industry Manufacturing Co., Lt | Airbag 3D vibration table (molding) The3D Vibration Tablefor Lost Foam Castingis designed forsan... |
 |
Bottom-turning hydraulic box turner machine | Seller: Hebei Guoning Heavy Industry Manufacturing Co., Lt | Bottom-turning hydraulic box turner machine The hydraulic box flipping machine mainly consists o... |
 |
Water ring sand temperature cooler | Seller: Hebei Guoning Heavy Industry Manufacturing Co., Lt | Water ring sand temperature cooler Main technical parameters Size: φ2000/φ2500/φ290... |
