Cement Basket
Cement basket drillingconsists of flexible steel spring bow welded to slip-on collars. Bows are hardened and tempered for maximum strength and uniformity. The cement basket is run on casing or liners above weak or porous formations to provide protection from hydrostatic pressure generated by the cement column. The overlapping metal fins of the cement basket provide flexibility and fluid passages while maintaining optimum support characteristics.
Performance Features of Cement Basket
The cement basket in drilling operation consists of heavy duty canvas liners and concentrated with high strength and flexible steel staves which are seated on the steel slip-on end collar.
Cement basket has the capability to help in premature cement hydration. This is to check hydro-static fluid column at the point of loss zone or weak formation
The cement baskets from Eneroil are designed particularly so that it can be able to adapt in a remarkable way as used in most of all types of well, to the bore hole and can hold large than the nominal size of the holes.
These baskets are designed for installation between two stop collars. Hence, these does not meant to be reciprocated. But travels the length of the joint just to allow the pipe movement.
Options of Cement Basket
Cement basket is available from sizes 4½" to 30" sizes configurations.
Slip-on type and the hinged type cement basket can be normally installed between slip-on type stop collars or stop collar or hinged camp over the casing to hold them in a place.
The baskets can be rotated and reciprocated as per requirement.
Technical Specifications of Cement Basket
|
Casing size |
Total Length |
Basket O.D. |
|||
|
in |
mm |
in |
|||
|
4 1/2 |
10 |
24 1/2 |
12 1/2 |
6 |
|
|
5 |
10 |
24 1/2 |
13 |
6 |
|
|
5 1/2 |
12 |
24 1/2 |
13 1/2 |
7 1/4 |
|
|
6 5/8 |
12 |
24 1/2 |
14 5/8 |
8 3/8 |
|
|
7 |
14 |
24 1/2 |
15 |
8 3/8 |
|
|
7 5/8 |
14 |
24 1/2 |
15 5/8 |
9 1/2 |
|
|
8 5/8 |
16 |
24 1/2 |
16 5/8 |
10 5/8 |
|
|
9 5/8 |
18 |
24 1/2 |
17 5/8 |
11 5/8 |
|
|
10 3/4 |
18 |
24 1/2 |
18 3/4 |
12 3/4 |
|
|
11 3/4 |
20 |
24 1/2 |
19 3/4 |
13 3/4 |
|
|
11 3/8 |
24 |
24 1/2 |
21 3/8 |
15 1/2 |
|
|
16 |
28 |
24 1/2 |
24 |
18 |
|
|
18 5/8 |
34 |
24 1/2 |
26 5/8 |
20 5/8 |
|
|
20 |
34 |
24 1/2 |
28 |
22 |
|
SAIGAO GROUP, as an excellent oil well equipment manufacturers, offers a wide range of oilfield cementing tools for you to choose from.
Send product request
Other supplier products
 |
ISHING TOOLS | The fishing tool is the most widely used tool for overhauling oil and water wells. There are many varieties and specifications of fishing tools. ... |
 |
Key Seat Wiper | Key Seat wiper Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The slidi... |
 |
F500 Single-acting Mud Pump | F500 single-acting drilling rig small mud pumpequipment has two surfaces which can bear high strength to ensure high efficiency of the operation. S... |
 |
Hydraulic Liner Hanger Tie-Back Assembly | The tie-back assembly is a special cementing tool for tieback operation. Tieback equipment allows existing liners with a receptacle to be extend... |
|
|
Cement Basket | Cement basket drillingconsists of flexible steel spring bow welded to slip-on collars. Bows are hardened and tempered for maximum strength and unif... |
Same products
 |
Chinese GT-DG250 Rolling Machine | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-DG250 Rolling machine uses a pair of rolling assemble on the machine, and with ... |
 |
Double Spindle Lathe NL251D | Seller: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | Seller: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
