High pressure compressor
This series of air compressor, crankshaft, connecting rod mechanism driven by a motor, make the axis of rotation into the reciprocating linear motion of the piston, through the level of the inlet and exhaust valve opening, closing, atmospheric pressure of the compressed air into 0.3 0.35 Mpa to level 2, and then compressed into 1.3 1.7 Mpa enter the level 3, then compressed into 5.5-7 Mpa into four levels, finally through the level 4 25 Mpa pressure of the air, and by the check valve and bleed valve into the gas storage devices for use for dg VF - 1.35/250 (for example).
The characteristics of
1 this series of air-cooled electric air compressor (hereinafter referred to as air compressor), using the most advanced, efficiency ratio leading to the domestic manufacturers of the fourth generation of high efficiency compressor host, the valve structure using annular valve structure, 8-10% higher than that of conventional air valve save electricity 20%.
2 safety: has the pressure switch, safety valve, such as multiple protection, prevent overpressure.
3 easy: there are thoughtful design, make its mobile flexible, simple operation, maintenance is convenient.
4 smooth running, low noise, low fuel consumption. High reliability, long life, low maintenance cost.
The compressor main technical parameters
1, medium composition: air
2, compressor models: SAST - 1.5/250 - a electric type air compressor
3, the structure form: V type, air-cooled
4, compressed series: four levels of compression
5, cylinder diameter mm at all levels: level 1, 155, 2 85, level 3, 40 level 20
6, after nominal volume flow m/min: 1.5
7, inspiratory pressure: Mpa (G) : atmospheric pressure
8, exhaust pressure: Mpa (G) : 25.0
9, suction temperature ℃ : 40 or less
10 ℃, gas temperature: 180 or less
11, compressor speed r/min: 980
12, mode of transmission: coupling straight league
13, control mode: the automatic unloading pressure, overpressure alarm downtime, electronic automatic drainage.
14, lubrication way: splash lubrication
15, installation: electric stationary
16, lubrication oil consumption: 90 / h
17, noise dB (A) : 90 or less
18, with power: Y225M turn 30 kw / 980-6
19 and stroke: 116 mm
20, overall dimensions (length x width x height) mm: 1850 * 1200 * 1200
21, weight: 1000 kg
Other supplier products
|
|
APP08 floor punching machine |
APP08 floor punching machineThe basic components:Press frameThe force of gas liquid cylinder(my company H series, P series, the series of FT)Option... |
|
|
Gas cylinder pressure tightness test machine |
An overview of theGas cylinder pressure tightness test machine is in accordance with the requirements for G B12137 for bottles, valves and plug thr... |
|
|
Pipe pressure and thermal stability of machine |
The purpose of,To measure hot and cold water with plastic pipe material, composite material (such as: PP, PP - B, PP - R - A, PZ - X, PB, PVC and a... |
|
|
GPV air booster pump |
air booster pump is applicable to the original air compressor system to improve
Pressure working environment, the working system of air pressure
Up... |
|
|
Blasting test bench is (pressure) |
Blasting test bench is (pressure)
Our company based on pneumatic supercharging device
Working principle, combines the actual conditions of our cou... |
All supplier products
Same products
