Two-Phase, Four-Phase Hybrid Stepper Motor Driver DM542
The two-phase Dm542 subdivided hybrid step engine driver adopts DC power supply 18-50v, which is suitable for driving a two-phase hybrid step engine 18-50v with a current less than 4.0a and an external diameter 42-86 mm. driver uses the current AC server driver loop to control the subdivision. The engine torque fluctuation is very small, the low speed operation is very stable, almost without vibration and noise, and the high speed torque is much larger than the other two-phase unit, and the position accuracy is high. packing machines and other high resolution equipment.
Other supplier products
|
|
Two-Phase, Four-Phase Hybrid Stepper Motor 34HS2460-120 |
Type: 34HS2460-120Phase: 2
Body length：126mmRated voltage: 2.58VResistance(20 ℃): 0.43± 10%Ω/phaseHolding torque: ≥12 N.cmRotor Torque: 2900g.... |
|
|
Two-Phase, Four-Phase Hybrid Stepper Motor Driver DM542 |
The two-phase Dm542 subdivided hybrid step engine driver adopts DC power supply 18-50v, which is suitable for driving a two-phase hybrid step engin... |
|
|
Two-Phase, Four-Phase Hybrid Stepper Motor 34HS8450-45 |
Type: 34HS8450-45
Phase: 2
Body length：80mmRated voltage: 2.1VResistance(20 ℃): 0.35± 10%Ω/phaseHolding torque: ≥4.5N.cmRotor Torque: 1400g.c㎡... |
|
|
Two-Phase, Four-Phase Hybrid Stepper Motor 17HS3410-02 |
类型：17HS3410-02阶段：2
机身长度：34mm额定电压：5VR电阻（20℃）：5.0±10％Ω/相保持扭矩：≥0.3N.cm转子扭矩：38g.c㎡步距角：1.8°额定电流：DC 1.0A /相电感：7.1±20％ mH / Pha... |
|
|
Two-Phase, Four-Phase Hybrid Stepper Motor Driver DM420 |
Two-phase Dm420 subdivided hybrid step engine controller, using DC power supply 12-36v, suitable to drive 24-36v, current less than 2,0A, external ... |
All supplier products
Same products
