Coolant Temperature Sensors
The coolant temperature sensor, with its slender head in contact with the coolant, is installed in the coolant jacket or pipeline of the engine block. Its interior is equipped with a thermistor with a negative temperature coefficient. When the engine coolant temperature increases gradually, the resistance value of the thermistor will gradually decrease, on the contrary, it will increase. As a result, when the engine coolant temperature changes, the output voltage of this sensor will also change accordingly. After receiving the signal from the coolant temperature sensor, the ECU corrects the injection time and ignition time of the engine.
Vehicle with a car coolant temperature sensormanufatured by MAPMS has advantages. It can timely sense and remind the owner of the wrong ignition time, coolant temperature, fan failure, etc. as this temperature gauge sensor caris very sensitive. In addition, it can also prevent problems from happening. The coolant temperature can be seen directly on the instrument panel. When there is an abnormality, the owner can find it in time so as to prevent the car radiator from boiling.
Coolant Temperature Sensors Features
Vehicle with temp sensor carmanufatured by MAPMS has some advantages.
It can timely sense and remind the owner of the wrong ignition time, coolant temperature, fan failure, etc. as this sensor is very sensitive.
In addition, it can also prevent problems from happening. The coolant temperature can be seen directly on the instrument panel.
When there is an abnormality, the owner can find it in time so as to prevent the car radiator from boiling.
What Are the Symptoms of a Bad Coolant Temperature Sensors ?
Low Temperature
Under cold conditions, the engine is difficult to start, the idle speed is unstable, and the power is insufficient during acceleration. The reason is that when the engine ECI cannot receive the normal signal from the coolant temperature sensor, will perform the safety insurance function in order to maintain the engine running. At this moment, ECI draws the substitute value of coolant temperature (80 ~ 90 ℃) stored in the memory as the coolant temperature value. Therefore, when the engine is cold, there is a lack of increase related to low engine temperature in the fuel injection quantity controlled by ECI, so that the mixture is thin, cause trouble starting and other faults.
Engine Malfunction
Under the condition of hot engine, the power is normal when the engine starts, idles and accelerates. However, the engine fault indicator is always on and the electric fan does not work.
Open or Short Circuit Fault
In case of open or short circuit fault, the electronic fan will rotate at high speed.
If you need any kinds of car auto spare parts, please contact us, as a professional auto spare parts supplier, MAPMS is willing to offer you high quality products.
Send product request
Other supplier products
 |
Throttle Position Sensors | The tps automotiveis also known as throttle opening sensor or throttle switch. In order to make the fuel injection meet the requirements of differe... |
 |
Neutral Safety Switches | The neutral safety switch relay is one of the vehicle safety switches to prevent accidents, which plays a role in safety protection. When the vehic... |
 |
Fuel Pressure Sensors | The fuel vapor vent pressure sensoris used to control the fuel pressure in the fuel circuit, maintain a constant fuel supply pressure to the inject... |
 |
Headlight Bulbs | HID Car Headlight Bulbs also named Xenon Bulbs High Brightness. 35W xenon lamp can produce 3200 lumens of bright light. Wide color temperature ra... |
 |
Fuel Level Sensors | The fuel sensor level uses the principle of the magnetic field generated by the ferrite magnet to control the on-off of the reed switch, and conve... |
Same products
 |
Inductive Components | Seller: Shenzhen Magnetic Cube Technology Co.,Ltd. | Inductive components, such as inductors and transformers, are essential in electronics, aiding in... |
 |
AULISS Rotary Screw Air Compressor | Seller: Auliss Henan Intelligent Technology Co., ltd. | Industrial Rotary Screw Air Compressor is a machine designed based on the screw air compressor wo... |
 |
Vehicle Flange | Seller: Aluminum Engine Casing Mold OEM | Automotive flanges are key parts used to connect and seal pipes, exhaust systems, hydraulic syste... |
 |
Car Crankshaft | Seller: Aluminum Engine Casing Mold OEM | The car v16 crankshaftis a meticulously engineered component, crafted from high-strength alloy st... |
 |
Brake Lever | Seller: Aluminum Engine Casing Mold OEM | The brake bar leveris a mechanical component designed to control and activate the braking system ... |
