test bench

名称:喷油泵试验台
Name: Diesel fuel Injection Pump test bench
规格:XBD-EMC
Spec: XBD-EMC
类别:试验台
Sort: Test bench
I The main features:
1 试验台控制和显示系统采用工业控制计算机和单片计算机MCS51双系统完全独立控制,拉开操作面板下的窗口即可启用作为备用控制系统的数显功能。联系人:齐忠田(总经理) 手机:13335285968
1 The test bench control and display system use industrial control computer and monolithic computer MCS51 double system ,complete independent control ,open the window under the operation panel , you can start the digital display function who is the standby control system
2 主机传动采用变频调速,调速范围在±4000转/分。
2 The host machine frequency conversion speed regulation. The regulation speed is about 4000 revolution /min
3 量油计数、主轴转速、齿杆行程、提前角度,均采用四位数显。
3 Oil metering counting. Main principal axis revolution, toothed bar stroke, in advance angle use 4 screen display and digital display
4 燃油温度、气体压力为三位数显。
4 The oil temperature, air pressure use 3 screen display and digital display
5 手动调速和转速多档预置。
5 The manual speed regulation and rotate speed multi –gear advance setting
6 0-0.25Mpa气源输出,内置式打气泵。
6 0-0.25Mpa air supply output , built-in type blast pump
7 具有DC12V和DC24V稳压电源输出。
7 It has DC12V and DC24V stable power output
8 主机为槽钢框架结构,整体结构紧凑、稳固。
8 The host machine is channel steel structure; the complete structure is compact and steady
9 壳体采用静电喷塑,机壳美观。
9 the shell use static painting, it is beautiful
10 集油箱可左右旋转,亦可上下调整。
10 The oil sump tank can realize right and left rotation, and also up and down regulation
11 试验台有紧急制动开关。
11 The test bench has urgent brake switch
12 采用控制方式先进的变频调速器,转速精度高。
12 It adopts advanced frequency conversion governor, with high precision rotate speed
13 试验台有欠压、过压、过热、过载等保护功能。
13 The test bench has under voltage, over pressure, super heating and over loading protection function
14 超低噪音。
14 The test bench has very low noise
15 试验台机械效率高,节约能源。
15 The test bench has high mechanical efficiency and save energy
二、喷油泵试验台的用途
II The usage of the Diesel fuel Injection Pump test bench
喷油泵试验台根据所调试的油泵,选用适当的附具,可进行如下项目的调试:
According to the different pump. The test bench use proper attachment, and carry out the following debugging
1 测试不同转速下喷油泵的各缸供油量和供油均匀性。
1 Test different cylinder oil supply condition quantity and oil supply evenness under different revolution
2 测试喷油泵的供油始点及供油间隔角度。
2 Test oil supply starting point and interval angle
3 调速器工作性能的检查及调整。
3 Governor working performance checking and regulation
4 压力补偿性能的测试及检查。
4 The pressure compensation performance test and checking
5 分配泵工作性能的测试及调整。
5 The distribution pump working performance test and regulations
6 冷启动装置及电磁阀性能检查。
6 The cold starting device and solenoid valve performance checking
7 分配泵各种转速下的回油量测量。(选装)
7 The distribution pump oil return test under different revolution (optional)
8 分配泵各种转速下的内压测定。
8 The distribution pump inner pressure test under different revolution
9 喷油泵密封性能实验。
9 The injection pump seal performance test
10 检查输油泵自吸功能。
10 Check the oil transfer pump self priming performance
11 存储、修改喷油泵调试数据并生成数据库。
11 Save, amend oil injection pump debugging date and form database
12 常见柴油机喷油泵调试数据的快速查询。
12 The commons diesel injection pump debugging data quick inquiry
13 油泵调速特性曲线自动生成并CRT终端显示。
13 The oil pump speed governing curve create automatically and CRT end display
14 内置高可靠性卧式打气泵。
14 The built-in high reliability horizontal type inflation pump
15 三“T”型工作台、宽体定位支架,设备运转稳定(选装)。
15 Three “T” type working bench, wide location bracket, with steady running
16 自备工具箱,常用、专用工具携带方便。
16 The attached too box ,the service tool and special tool is conveniently taken!
三、喷油泵试验台主要技参数
III The main technical data
1 主轴转速:0-4000转/分,正反转选择。
1 The principle axis revolution: 0-4000r/min. the two directions are optional
2 最多可测试喷油泵缸数:12缸。
2 It can test oil injection pump cylinders is 12
3 主轴转速波动:±1转/分。
3 The principle axis revolution fluctuate: ±1r/min
4 主机功率:5.5KW 、7.5KW、11KW、15KW、18.5KW、22KW....
4 The host machine power : 5.5KW 、7.5KW、11KW、15KW、18.5KW、22KW.......
5 供油传动电机功率:1.1KW。
5 The oil supply drive motor power: 1.1KW
6 主轴中心距工作台高度:125mm。
6 Principle axis center to center spacing working bench height : 125mm
7 量油计数:0-1000次,每50次一档。
7 The oil metering counting : 0-1000 times , one gear per 50 times
8 转速、计数、齿杆行程、提前角度,显示位数:4位。
8 Revolution .counting, toothed bar stroke, in advance angle: four digital display
9 气压、燃油温度显示位数:3位
9 The pressure, oil temperature display : three digital display
10 燃油温度自动控制:40℃±2℃。
10 The oil temperature automatic control : 40℃±2℃
11 气源压力:0-0.25Mpa。
11 Gas source pressure: 0-0.25Mpa
12 燃油箱容积:≥ 40L 。
12 The oil tank volume : ≥ 40L
13 燃油泵供油量:≥ 10升/分。
13 The oil pump oil supply : ≥ 10L/Min
14 燃油滤清器精度:5μ。
14 The oil filter precision : 5μ
15 玻璃量筒体积:大量筒:150ml; 小量筒:45ml。
15 The glass measuring cylinder volume:
Big measuring cylinder: 150ml
Small measuring cylinder: 45ml
16 燃油压力表1.5级:0-0.6Mpa;0-6Mpa;0-0.16Mpa;0-1.6Mpa。
16 The oil pressure meter 1.5 grade : 0-0.6Mpa;0-6Mpa;0-0.16Mpa;0-1.6Mpa。
17 标准喷油器:ZS12SJI。
17 The standard injector: ZS12SJI
18 冷却方式:强制风冷。
18 Cooling method: forced wind cooling
19 试验台外型尺寸(mm):1600×960×1750
19 Test bench overall dimension (mm): 1600×960×1750
20 试验台重量:900Kg。
20Test bench weight: 900Kg
本厂也可根据客户不同使用环境和喷油泵特殊型号,定做加工非标试验台及偶件测试试验台。




Send product request

To: Taian Xinbaodi Experimental Equipment Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

 Electrical Controller Pump Test Bench
Electrical Controller Pump Test Bench XBD-CR100 Fuel Injection Pump, Fuel Injector is specially designed by us for testing common rail fuel injector and common rail pump, having advance...
diesel fuel injection pump test stand
diesel fuel injection pump test stand Name: Diesel fuel Injection Pump test stand Spec: XBD-EMC Sort: Test stand I The main features: 1 The test bench control and display syst...
test bench
test bench 名称:喷油泵试验台 Name: Diesel fuel Injection Pump test bench 规格:XBD-EMC Spec: XBD-EMC 类别:试验台 Sort: Test bench I The main features: 1 试验台控制和显...
Diesel Fuel Injection Pump Test Bench
Diesel Fuel Injection Pump Test Bench XBD series of high-pressure diesel fuel injection pump test stand is stable and reliable performance, the appearance of generosity, economical and ...
diesel fuel injection pump test stand
diesel fuel injection pump test stand XBD series of high-pressure diesel fuel injection pump test stand is stable and reliable performance, the appearance of generosity, economical and ...
All supplier products

Same products

decanter centrifuge
decanter centrifuge Seller: Luhai Energy Co.,Ltd Solid liquid separation horizontal decanter centrifuge (Decanter Centrifuge for short), one of ke...
Shrink wrapper (film) Seller: sales engineer Work power    According to your needsWorking pressure    0.6~0.8Mpa...
Water milling machine gem equipment
Water milling machine gem equipment Seller: DongTai Ultrasonic Gemstone Machine Co., Ltd Function:mainly used for the polish of the raw stone with wax, it's easy operate and high efficient.
Window Hing Automatic Assembly Machine
Window Hing Automatic Assembly Machine Seller: Shenzhen Zeyu Intelligent Industrial Science Technology CO.,LTD Machine parameters: Model: YJ-ZY11-01 Capacity: 10-15pcs / min Power:&nb...
Base of Base of Door Knob Door Handle Automatic  Reaming Tapping Machine
Base of Base of Door Knob Door Handle Automatic Reaming Tapping Machine Seller: Shenzhen Zeyu Intelligent Industrial Science Technology CO.,LTD Machine specification: Model::C01-ZY03-01 Capacity:20-25pcs/min Power:AC380V 50Hz Air p...