PVDF Extrusion Grade

PVDF Extrusion Grade FTH-212 Characteristic Physical properties Specification ASTM Test standard MFR(g/10min)5~10ASTM D1238, 2300C/5kgAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.75~1.77ASTM D792, @23/230CWater absorption (%)≤0.05ASTM D570Mechanical properties Tensile yield strength(Mpa)≥40ASTM D638 50mm/min@230CYield elongation (%)5-15Tensile strength(Mpa)≥35Elongation at break (%)≥30Hardness(Shore D)70-80Thermal properties Melting point(0C)165~175ASTM D3418,100C/minProcess safety instructions λ This product should be processed under 370℃,to avoid producing toxic gases;λ PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;λ Operators should take good care of personal protection during the use procedure and processing.Packaging and storage λ PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum or cardboard.λ It must be stored in clean, cool, dry place.



Send product request

To: Zhejiang Fotech International Co., ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

FKM(fluoroelastomer)
FKM(fluoroelastomer) FKM (Fluoroelastomer)FKM is copolymer of vinylidene fluoride and hexafluoropropene. The content of fluorine is 66% byweight. It can be molded, extr...
FKM Powder
FKM Powder FKM PowderPolymer Processing Additives (PPA)FKM powder is one kind of Fluoroelastomer with shape of powder; it could be used as polymer processing ...
PVDF Molding Grade
PVDF Molding Grade PVDF Molding Grade FTH-213 Characteristic      Physical properties Specification ASTM Test standard MFR(g/10min)1~10ASTM D1238, 2300C/12.5kgAppear...
FEP Molding(Lining) Grade
FEP Molding(Lining) Grade FEP Molding (Lining) GradeFEP Molding grade FT-M has excellent thermo-stability and chemical inertness, outstanding electrical insulation and very ...
New Type Foaming Agent R245fa
New Type Foaming Agent R245fa HFC-245fa is a hydrocarbon used primarily for closed-cell spray foam insulation, also known as pentafluoropropane. Unlike CFC and HCFC blowing agen...
All supplier products

Same products

Medium-low Temperature Polyimide Thermal  Etched Foil Film Heaters
Medium-low Temperature Polyimide Thermal Etched Foil Film Heaters Seller: Shenzhen Fulianda Heater CO.,LTD Medium-low temperature polyimide Thermal etched foil heater is one thin,lightweight flexible heat...
OEM Vehicle Battery Pack Warmer/heating Pad for Car Battery Pack
OEM Vehicle Battery Pack Warmer/heating Pad for Car Battery Pack Seller: Shenzhen Fulianda Heater CO.,LTD BEV car are used widely now.but one important problem is that the continuation of the journey kil...
OEM High Temperature Flexible Silicone Rubber Heater Pad With UL
OEM High Temperature Flexible Silicone Rubber Heater Pad With UL Seller: Shenzhen Fulianda Heater CO.,LTD High temperature flexible silicone rubber heater pad is made of America silicone material. The he...
Customize Medium-low Temperature Silicon Heater Mat Element
Customize Medium-low Temperature Silicon Heater Mat Element Seller: Shenzhen Fulianda Heater CO.,LTD Medium-low temperature silicon heater mat element is sandwich structure.The top and bottom layer ...
High Temperature AC And DC Voltage Thin Kapton Film Foil Heaters
High Temperature AC And DC Voltage Thin Kapton Film Foil Heaters Seller: Shenzhen Fulianda Heater CO.,LTD High temperature kapton film foil heater is one of the thinnest heating film.so the temperature r...