Flanged End Metal To Metal Seat Ball Valve

MAIN FEATURES:The seat material of general purpose ball valve employs generally non-material,such as PTFE. Limited by the seat material ,the general purpose ball valve can not be used in case of high articles,and ash dregs neither.Metal to metal seat design has been employed perfectly for the ball and seat,which has also adopted the advanced hardening technologies,such as ultro-sonic spray coating,nickel base spay welding,surface specially hardening,stellite spay welding,ceramic material with high strength and hardness,and so on.Surface hardness of ball and seat may generally reach more than HRC60, maximun is up to HRC74.And application temperature of the material may be to 540℃,maximun is 980℃.Combining strength of the material gets to be more than 10000 PSI.Besides,the surface materials posses also very good resistance properties of friction and impact.Nipo metal to metal seat ball valves are suitable for use in most hard working conditions.Main Parameter SpecificationDesign and Manufacture:API 6D,ASME B16.34(BS5351),API 608,MSS-SP-72Face to Face Dimension:ASME B16.10,API 6DFlange Connection Dimension:ASME B 16.5BW Connection Dimension:ASME B16.25Test and Inspection:API 598,API 6DFire-Safe Design:API 607/6FAAnti-Static Design&Anti Blow-Out StemProduct RangeBody material: carbon steel, stainless steel, alloy steelFull bore and reduced bore designNominal diameter:1/2"~48"(DN15~DN1200)End Connection: RF,RTJ, BWPressure range: Class150~2500(PN16~PN420)Working temperature: -46℃~+540℃Operation : Handle, Gear, Electric actuator, etc



Send product request

To: Zhejiang Naibang Valve CO.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Lug Type Dual Plate Swing Check Valve
Lug Type Dual Plate Swing Check Valve Lug Type Dual Plate Swing Check ValveStructural FeatureShort structural length,only 1/4~1/8 of that of traditional flanged check valve;Low volume,l...
Cast Steel Flanged End Trunnion Mounted Ball Valve
Cast Steel Flanged End Trunnion Mounted Ball Valve Cast Steel Trunnion Ball ValveMain Features:The side entry trunnion mounted ball valve has been designed two piece body type or three piece body ty...
3Pcs Forged Steel Threaded Ball Valve
3Pcs Forged Steel Threaded Ball Valve 3Pcs Forged Steel Ball ValveMAIN FEATURES:Principle of the forged steel floating ball valve: This kind of ball valve has a floating ball supported ...
Wafer Type Single Plate Swing Check Valve
Wafer Type Single Plate Swing Check Valve Wafer Type Single Plate Swing Check Valve(Long Type) Structural FeatureShort structural length,only 1/4~1/8 of that of traditional flanged check va...
Forged Steel Flange And Butt-Welded Gate Valve
Forged Steel Flange And Butt-Welded Gate Valve Flange and Butt-Welded Gate ValveMain Parameter SpecificationDesign and manufacture conform to API 602,BS 5352,ANSI B16.34Connection ends conform t...
All supplier products

Same products

Pure Graphite Packing
Pure Graphite Packing Seller: NINGBO TECHO SEALING GASKET CO.LTD Graphite packing with carbon fiber reinforced      Description:  Each strand is reinforced wi...
Kammprofile Gasket With Integral Outer Ring
Kammprofile Gasket With Integral Outer Ring Seller: NINGBO TECHO SEALING GASKET CO.LTD Kamprofile Gasket With Loose Outer Ring utilizes a loose fitting guide ring. This popular design ...
Modified PTFE Gasket
Modified PTFE Gasket Seller: NINGBO TECHO SEALING GASKET CO.LTD 1.Composite gasket of cladding other non-metal metal with PTFE, which does not only have the chem...
High Temperature IX Ring Joint Gasket
High Temperature IX Ring Joint Gasket Seller: NINGBO TECHO SEALING GASKET CO.LTD The IX Seal-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in ...
PTFE Packing Fiiber With Oil
PTFE Packing Fiiber With Oil Seller: NINGBO TECHO SEALING GASKET CO.LTD I.It is weaved by levels of PTFE fiber, and treated with special lubricant. It is a kind of packi...