CSA Expansive Additive
CSA expansive additive description:
The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.
As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001
CSA expansive additive technical data:
|
Parameters |
CSAExpansiveadditiveI |
CSAExpansiveadditiveII |
|
|
MgO% |
≦5.0 |
≦5.0 |
|
|
Watercontent% |
≦3.0 |
≦3.0 |
|
|
TotalAlkali% |
≦0.75 |
≦0.75 |
|
|
Chlorideion% |
≦0.05 |
≦0.05 |
|
|
SpecificSurfaceArea |
≧200m2/kg |
≧200m2/kg |
|
|
Fineness |
≦12 |
≦12 |
|
|
Settingtime |
Initialsettingtime |
≧0:45 |
≧0:45 |
|
Finalsettingtime |
≦10:00 |
≦10:00 |
|
|
LimitedExpansiveRate(%) |
7daysinwater |
≧0.025 |
≧0.05 |
|
21daysinair |
≧-0.020 |
≧-0.010 |
|
|
Compressivestrength(MPa) |
7days |
≧25 |
≧25 |
|
28days |
≧45 |
≧45 |
|
|
Bendingstrength(Mpa) |
7days |
≧4.5 |
≧4.5 |
|
28days |
≧6.5 |
≧6.5 |
|
CSA expansive additive performance:
(1)As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.
(2)Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.
(3)The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.
(4)Anti freezing: D150.
(5) Sulphate resistance of concrete is increased. No pollution to water.
CSA expansive additive application:
(1)For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.
(2)To extend the space length of post casting zone of cast-in-place overlength structure.
(3)To control the crack producing result of temperature difference in large sized structural concrete.
(4)For rigid roofing.
(5) Making non-shrinkage cements.
CSA expansive additive packing:
By 50kgs bags or jumbo bags.
CSA expansive additive Storage:
Store in dry place, guard against damp. Warranty period: 1 year.
For the special cement products, it includes calcium aluminate cements (CA cement)and calcium sulfoaluminate cements (CSA cement/CSA binder). The CSA cement is more and more imported by GRC manufacturers and dry mix mortars manufactures because of its higher performance compare to the Portland cement such as fast setting time, rapid hardening and high strength in 3 days.
Send product request
Other supplier products
| White Portland Cement | or white ordinary Portland cement (WOPC) is similar to ordinary, gray Portland cement in all respects except for its high degree of whiteness. Obt... | |
| Thermal Insulation Products | Insulating materials introduction Insulating material is a material that reduces or prevents the transmission of heat or sound or electricity. We ... | |
| Calcium Aluminate Cement | Description of Calcium aluminatecement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temp... | |
| CSA Binder | CSA BinderIntroduction: Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious material... | |
| Magnesia Bricks | Magnesia bricks description Magnesia bricks are a kind of alkalescency refractory bricks that made from the sintered magnesium with its content of ... |
Same products
| Peptide Technology Cooperation & Transfer | Seller: PeptiOrigin Biotechnology Co., Ltd. | Peptide Technology Cooperation & Transfer Driving Innovation Through Strategic Partnerships ... | |
| Recombinant Human Fibroblast Growth Factor-basic | Seller: Hangzhou NeuroPeptide Biological Science and Technology Incorporation, Ltd | Physical Appearance:Freeze-dried powder Formulation:5mMPB(pH7.4) before freeze-drying TheorypI:... | |
| Recombinant Staphylococcal Protein A | Seller: Hangzhou NeuroPeptide Biological Science and Technology Incorporation, Ltd | TheorypI:5.10 Resources:Escherichia coli(E. coli) Purity:≥95% Storage condition:-20℃ Stora... | |
| NuPerley Core 700 | Seller: Hangzhou NeuroPeptide Biological Science and Technology Incorporation, Ltd | NuPerley Core 700 Matrix:Rigid agarose microsphere Ligand:n-octylamine Particle size, d50:~90 ... | |
| Q NUPharose Fast Flow | Seller: Hangzhou NeuroPeptide Biological Science and Technology Incorporation, Ltd | Matrix:6% Cross-linked agarose Ligand:Quaternary ammonium salt, -CH2CH(OH)CH2N(CH3)3+ Particle ... |
















