Quartz Materials
Quartz Materials
Hydrothermal Growth of Quartz:
CQT supply piezo single crystal blanks, which include quartz materials and quartz blanks. We has been servicing for microelectronic manufacturers, defense related contractors, National laboratories, universities and scientists around the world since 1990
Product Parameters
- Physical properties of synthetic crystal quartz
|
Density, g/cm3 |
|
|
Melting point, °C |
1467 |
|
Thermal conductivity, W/(mxK) (T=25°C) |
|
|
Thermal coefficient of linear expansion at temperature range 0-25°Ñ, °C-1 |
|
|
Hardness (Mohs) |
7 |
|
Specific heat capacity, J/(kgxK) (T=25°C) |
710 |
|
Dielectric constant at 30 MHz |
|
|
Young's modulus (E), GPa |
|
|
Shear modulus (G), GPa |
|
|
Bulk modulus (K), GPa |
|
|
Chemical stability |
insoluble in water |
|
Elastic coefficients |
C11=87 C12=7 C44=58 C13=13 C14=18 C33=106 |
More details about finished crystals, saw filters, quartz blanks process flow and fused silica wafers, please contact us.
Our company export quartz blanks, LN waferand LT wafer
|
l, mm |
n0 |
ne |
l, mm |
n0 |
ne |
l, mm |
n0 |
ne |
|
3 |
a) The amount of crystal defect and impurity in synthetic quartz crystal depends on growth rate, mineralizer and raw material. The growth rate affects greatly to the important properties such as infra-red absorption coefficient α, which correlates to Q value, and frequency –temperature characteristics. The larger growth rate causes increase in α, decrease in Q value, and dispersion in frequency-temperature characteristics.
b) The quality index of synthetic quartz crystal was originally a Q value, and a 5 MHz quartz crystal unit operated in 5th overtone mode was used to obtain the Q value. But it required laborious work to fabricate the 5 MHz crystal unit, so the index had been changed to the coefficient α instead of the Q value.
a) Twinning: There shall be no electrical or optical twinning in the usable region.
b) Strain: There shall be no strain contained both inside and surface of seed crystal as well as in a grown quartz crystal.
c) Cracks and fractures: There shall be no cracks, chippings or fractures in the usable region.
d) Inclusion density: The specification is in accordance with the IEC 60758.
|
Size range |
Qty per cm3 |
|||
|
Grade (µm) |
10 to 30 |
30 to 70 |
70 to 100 |
>100 |
|
Ia |
2 |
1 |
0 |
0 |
|
Ib |
3 |
2 |
1 |
1 |
|
I |
6 |
4 |
2 |
2 |
|
II |
9 |
5 |
4 |
3 |
|
III |
12 |
8 |
6 |
4 |
e) Infra-red quality indication: The specification is in accordance with the IEC 60758.
|
Grade |
Estimated Q values (x 106) |
|
|
A |
||
|
A |
3 |
|
|
B |
||
|
C |
||
|
D |
f) Etch channel density: The specification is in accordance with the IEC 60758.
|
Grade |
|
|
1 |
10 |
|
2 |
30 |
|
3 |
100 |
|
4 |
300 |
|
5 |
600 |
a) Angles:
b) Dimensional tolerance:
c)Surface roughness: as customized, lapped and polished are both available.
Send product request
Other supplier products
 |
Quartz Blanks | Quartz Blanks This material consists of single-crystal right-handed a-quartz artificially grown bars which is intended for use in fabrication of p... |
 |
Tellurium Oxide(TeO2) | Tellurium Oxide(TeO2) Brief1:Tellurium dioxide (TeO2) is a solid oxide of tellurium. It is encountered in two different forms, the yellow orthorho... |
 |
Optical Grade Lithium Niobate Wafers | Optical Grade Lithium Niobate Wafers Our abundance experience at growing and mass production for Optical grade Lithium Niobate. We are equipped wi... |
 |
Optical Grade Lithium Tantalate Wafers | Optical Grade Lithium Tantalate Wafers Our abundance experience at growing and mass production for Optical grade Lithium Tantalate. We are equippe... |
 |
Single Crystal Quartz Wafers | Single Crystal Quartz Wafers Our abundance experience at growing and mass production for piezo grade quartz . We are equipped with advanced facili... |
Same products
 |
Warehouse Automation Expert | Seller: HAI ROBOTICS | Warehouse Expert Intelligent Case-to-person Solution Hai Robotics provides highly efficient Goo... |
 |
Retail Logistics Solutions | Seller: HAI ROBOTICS | Logistics Management in Retail Industry As market instability factors continue to increase, comp... |
 |
Healthcare | Seller: HAI ROBOTICS | Healthcare Supply Chain Automation Due to aging populations and increased disease rates, medical... |
 |
Apparel | Seller: HAI ROBOTICS | As the global fashion industry continues to grow, the supply chain is facing a range of challenge... |
 |
Electronics | Seller: HAI ROBOTICS | As consumer demands for personalization and customization continue to rise, production modes are ... |
