best quality Cable laying machines,Quotation Cable Pushers

Description

The cable pusher version has been designed to allow cable to be lifted in from one side. Cable Laying Equipment design has the advantage of being more compact when used in restricted areas such as a trench. Cable laying machines is easier to lift heavy cable into the side of the pusher than cable pusher is to lift it over the pusher and into the top. The hydraulic power Cable Laying Equipment unit includes the control laying and is positioned remotely, generally on the embankment above the trench. 

Specification cable pusher

HYDRAULIC POWERPACK

Diesel Engine 

Kubota D902 - 15 kW @ 3600 rpm

Fuel Tank Capacity

40 L

Engine Oil

Shell Rimula

Hydraulic Oil

Castrol Hyspin AWH 46

Hydraulic Fluid Reservoir Capacity

90 Litres

Run time/tank

8 -9 hrs dependant on workload

Hydraulic Load Sense Piston Pump

25 L/min

Maximum System Pressure

240 bar (3500 psi)

Hydraulic Power unit Mass

482 kg

CABLE PUSHER

Frame Footprint

Fits into 730 mm trenchRefer to attached drawing 

Cable Pusher Unit Overall Dimensions (LxWxH)

1350 mm x 900 mm x 534 mm

Push or Pull

Machine is capable of pushing, pulling or pushing and pulling.

Clamping pressure

User adjustable. Clamping pressure and pull/push force displayed on gauges.

Maximum Cable Push Force (at reduced line speed) 

20kN (2000kg)

Maximum Line Speed (at reduced push force) 

25 m/min

Line cable speed and distance display

On pendant

Capstan Pull

Capstan enables polypropylene rope to be winched 

Maximum Capstan Winch Line Pull Force

16 kN (1600 kg)

Maximum Capstan Winch Line Pull Speed

23 m/min

Adjustable Jaws, Cable Capacity.

50 to 140 mm cables

Pusher Unit Overall Dimensions (LxWxH)

1350 mm x 900 mm x 534 mm

Cable Pusher Mass

420 kg

Cable Laying Equipment not only applied for traction power cable, communication cable and aerial wire, also for other tranction fields in the situation of cable duct, tunnel, direct-burried, long-distance transmisson. Cable laying machines has small volume light weight, strong thrust force ,easy to operate, so cable pusher can be used alone or coordinated with our company other conveying sets.

 

 




Send product request

To: Bazhou Dpair Power Tools Factory
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Manufacture Mechanical Drum Jacks,low price Hydraulic Drum Jacks
Manufacture Mechanical Drum Jacks,low price Hydraulic Drum Jacks Specifications  cable drum jack,Cable Drum Lifting Jacks,Hydraulic cable drum jack,Mechanical Dru...
frp duct rodder,FISH TAPE,CONDUIT SNAKES,Tracing Duct Rods
frp duct rodder,FISH TAPE,CONDUIT SNAKES,Tracing Duct Rods Specifications fiberglass duct rodde,rduct rod,frp duct rodder,duct rodder Fiberglass duct rodder feat...
Iron Pole climber&Pole climbing,lineman climber with belts
Iron Pole climber&Pole climbing,lineman climber with belts Concrete Pole climber,Pole climber&Concrete Pole climber,Steel Pole climbers&Cement Pole climber Application:Used to climb the concrete pol...
Sales Cable Drum Jacks,Cable Drum Handling,best Cable Drum Lifting Jacks
Sales Cable Drum Jacks,Cable Drum Handling,best Cable Drum Lifting Jacks Specifications  cable drum jack,Cable Drum Lifting Jacks,Hydraulic cable drum jack,Mechanical Dru...
Manufacture Fiberglass duct rodder,duct rodder,high quality duct rodder
Manufacture Fiberglass duct rodder,duct rodder,high quality duct rodder Description:Duct Rodders applies in tow lead-rope through a pipe,it is auxiliary means. ...
All supplier products

Same products

Stud Bolt with Teflons Coated (A320-L7/ L7M)
Stud Bolt with Teflons Coated (A320-L7/ L7M) Seller: Stud Bolt with Teflons Coated A320-L7M 1). Standard, ASTM A320-L7/L7M stud bolt 2). Grade, Gr. B...
Carriage Bolt with Mushroom Head and Square Neck, Half/Full/UNF/UNC Thread Type
Carriage Bolt with Mushroom Head and Square Neck, Half/Full/UNF/UNC Thread Type Seller: Material: Q235 Diameter: M4, M5, M6, M8, M10, M12, M16, M18, M20, M24 and M27 (3/16-, 1/4-, 5/16-...
Eye Bolt, DIN 444
Eye Bolt, DIN 444 Seller: Standard: DIN 444 Customized drawings are accepted Materials: carbon steel and stainless steel Su...
Hex Flange Bolt DIN 6921
Hex Flange Bolt DIN 6921 Seller: Standard: DIN6921 Materials: carbon steel (galvanized, self-color, hot dippedgalvanized), copper,...
Hexagon socket head cap screw DIN912
Hexagon socket head cap screw DIN912 Seller: 1). Standard: DIN912 bolt 2). Grade: DIN Gr. 4.6--Gr. 12.9 3). Material: Carbon steel, alloy stee...