Z3080 RADIAL DRILLING MACHINE

• 

The machine is on the basis of "drilling machine series design", follow the progress of science and technology and development to optimize the design of the product. It mainly applied to black metal pieces in drilling, reaming, reaming, spot-facing and tapping screw thread processing. This series machine has the following features:

The machine has the following advantages:

1) The function of the machine tool main operating handles, buttons, etc all focus on the spindle box panel, manipulation of the machine tool is very convenient

2) Rocker driving outside column around the inner cylinder rotary to + 180 °

3) Rocker arm can be optional lift along the exterior columns

4) The spindle box along the radial guide moving around.

5) The machine has three places with "rhombic block clamping mechanism, rocker arm lifting is through screw nut pair by pillar at the top of the motor drive. And insurance nut mounted on the lifting nut, to ensure that the rocker arm can't suddenly fall. Radial clamping is driven by hydraulic rhombic block implementation. After clamping, rhombic block self-locked. Rocker arm up or down after the clamping action, by the cylinder seat electric switch control, radial clamping automatically. Spindle box and column clamp: the spindle box and column clamping is rhombic block clamping hydraulic drive. Two actions can be simultaneously, can also be used separately, is the manipulation of the spindle box on the front panel knobs.

6) The spindle box and column clamp: the spindle box and column clamp are hydraulic pressure drive, tetrapod clamping. Two actions can be simultaneously, can also be used separately, select switch is the control of the spindle box on the front panel.

7) The electrical control system of machine tool is used the programmable controller, and reliable in performance.

Other supplier products

	VDF-850 vertical machine center	VDF - 850 vertical machining center is the dalian machine tool group co., LTD. The introduction of advanced technology production of a new generati...
	卧式加工中心MDH65
	Five Axis Simultaneous Machining Center VS555
	VS555 FIve Axis Simultaneous Machining center
	DL - 30 m slant bed CNC lathe	DL - 30 m horizontal CNC lathe is the dalian machine tool group production of the two axes linkage, half closed loop control of numerical control l...

Same products

	S2C Prototyping Software Prodigy Player Pro	Seller: S2C Limited	Prodigy Player Pro Prodigy Player Pro is a rapid prototyping softwarethat works with the FPGA-ba...
	S2C Prodigy Multi-Debug Module Pro	Seller: S2C Limited	Multi-Debug Module Pro The S2C Prodigy Multi-Debug Module is an innovative debug solution for FP...
	Prodigy S7-9P Logic System – Prototyping with VU9P FPGA	Seller: S2C Limited	Prodigy S7-9P Logic System – Prototyping with VU9P FPGA Prodigy S7-9P Logic System The Prod...
	Virtex UltraScale (VU) Prodigy Logic Systems	Seller: S2C Limited	Virtex UltraScale Series S2C's Prodigy Virtex UltraScale VU440 Logic Systems are engineered to le...
	Prodigy S7-19P Logic System – Prototyping with VU19P FPGA	Seller: S2C Limited	Prodigy S7-19P Logic System The Prodigy S7-19P Logic Systems utilize Xilinx's highest capacity FP...