AlNiCo Magnets
Category: AlNiCo magnets/metal perpament magnets
Advantages: high magnetic energy, good temperature stability
Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized
AlNiCo magnet Chinais the earliest developed permanent magnetic material, it is an alloy of Al, Ni, Co, Fe and another rare metal element. china alnico magnetsbirthed in 30 years of 20 Century, its magnetic property is best in the years, so it was most widely used in permanent magnetic motors. But that application in motors was replaced step by step when ferrite permanent magnets and rare earth magnets produced. And the proportion of AlNiCo application for motors went down. For AlNiCo magnets, the ability of corrosion resistant is good, surface treatment is not needed for it. It usually made into cylinder alnico magnets for saleor block AlNiCo magnets. The advantages of AlNiCo magnets are high remanence (maximum up to 1.35T) and low-temperature coefficient(-0.02%/℃), maximum working temperature is around 520℃, the magnetic properties change caused by temperature change is very small. The disadvantages of AlNiCo are low coercivity (normally lower than 160KA/m), and the demagnetize curve is not linear, it is easy to be magnetized and also easy to be demagnetized.
According to the different production methods, it classified as sintered AlNiCo magnets and cast AlNiCo magnets. Cast AlNiCo can be machined into different shapes and sizes, for all kinds of permanent magnets, cast AlNiCo magnets have the lowest Temp.Coefficient, its working temperature can be up to 600 degrees. Cast AlNiCo magnets are used for kinds of instruments and meters, auto parts,electric-acoustic, teaching field etc.
Compared with cast AlNiCo magnets, sintered AlNiCo magnets suit for making complex shapes and smaller sizes,the size tolerance for sintered AlNiCo magnets is smaller and better than cast AlNiCo magnets. For sintered AlNiCo magnets, the process is simple and it can be pressed into needed size directly.The property of sintered AlNiCo magnets is lower than cast AlNiCo magnets, but sintered AlNiCo magnets more suitable for machine.Sintered AlNiCo magnets are wide used on instruments and meters, comm unicate,magneto-electricity switch, and kinds of transducers.
|
Type |
(BH)Max |
Br |
Hcb |
D |
a(Br) |
Tc |
Tw |
|||
|
KJ/cm3 |
MGOe |
mT |
Gs |
KA/m |
Oe |
g/cm3 |
﹪/K |
℃ |
℃ |
|
|
LN9 |
680 |
6800 |
30 |
380 |
-0.03 |
760 |
450 |
|||
|
LN10 |
600 |
6000 |
40 |
500 |
-0.03 |
760 |
450 |
|||
|
LNG12 |
720 |
7200 |
45 |
500 |
-0.03 |
810 |
450 |
|||
|
LNG13 |
700 |
7000 |
48 |
600 |
-0.03 |
810 |
450 |
|||
|
LNG34 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG37 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG40 |
1250 |
12500 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG44 |
1250 |
12500 |
52 |
650 |
-0.02 |
860 |
525 |
|||
|
LNG52 |
1300 |
13000 |
56 |
700 |
-0.02 |
860 |
525 |
|||
|
LNGT28 |
1000 |
10000 |
58 |
720 |
-0.025 |
860 |
550 |
|||
|
LNGT36J |
700 |
7000 |
140 |
1750 |
-0.025 |
860 |
550 |
|||
|
LNGT32 |
800 |
8000 |
100 |
1250 |
-0.025 |
860 |
550 |
|||
|
LNGT40 |
800 |
8000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT60 |
900 |
9000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT72 |
1050 |
10500 |
112 |
1400 |
-0.025 |
860 |
550 |
|||
Meank, as an excellent holding magnets manufacturer, offers a wide range of strong magnets for magnet fishingfor you to choose from.
Send product request
Other supplier products
| Adhesive Magnets | Adhesive neodymium magnets(adheisve backed magnets) are used more and more in industry. What is an adhesive magnet? The adhesive has no magnetism i... | |
| Neodymium Cone Magnets | As neodymium magnets used more and more widely, common shape (such as disc magnets, block magnets, ring magnets, cylinder magnets ) can not meet al... | |
| Rubber Magnetic Sheets | Category: rubber magnets/ flexible magnets Advantages: can be made into complex shape without mechanical processing Disadvantages: low magnetic e... | |
| Ferrite Pot Magnets | Pot magnets are the very useful permanent magnets assemblies, they are results of the development of magnets application, and play important roles ... | |
| Neodymium Cube Magnets | Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube... |
Same products
| Coal Mine Gas Suction Drainage Rubber Hose | Seller: Hengshui Runxi International Trade Co., Ltd. | Coal Mine Gas Suction Drainage Rubber Hose Compared to traditional gas extraction pipes, this pr... | |
| Oil Suction And Delivery Hose for Multi Application | Seller: Hengshui Runxi International Trade Co., Ltd. | Oil Suction And Delivery Hose for Multi Application Oil suction deliveryhoseis designed for suct... | |
| Large Diameter Water Suction And Discharge Rubber Hose | Seller: Hengshui Runxi International Trade Co., Ltd. | Large Diameter Water Suction And Discharge Rubber Hose MainFeatures & Performance Large-dia... | |
| Slurry Discharge Mud Dredging Suction Rubber Hose | Seller: Hengshui Runxi International Trade Co., Ltd. | Slurry Discharge Mud Dredging Suction Rubber Hose Slurry Suction and Discharge Hose Our profess... | |
| Large Diameter Suction and Delivery Hose with Flange | Seller: Hengshui Runxi International Trade Co., Ltd. | Large Diameter Suction and Delivery Hose with Flange Large Diameter Suction And Delivery Hose wi... |













