Ferrite/Ceramic Magnets
Category: hard ferrite magnets/ china ceramic magnets
Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed
Disadvantages: low magnetic energy; not resistant to low temperature
china ferrite magnetsbelong to sintered permanent magnetic material, which made from oxide iron, barium, and strontium carbonate by ceramic processing technology, just because of the processing method, it also named as ceramic magnets in America.This magnetic material has strong ability to resist demagnetization and the advantage of low cost.
Ferrite permanent magnets classified as isotropic and anisotropic. Isotropic ferrite magnets have weak magnetic strength, but it can be magnetized through different directions. Anisotropic ferrite magnets have stronger magnetic strength than isotropic, but it can be only magnetized through certain direction.
By magnetic strength, ferrite magnets or ceramic magnets are much weaker than neodymium permanent magnets and SmCo magnets, but stronger than AlNiCo magnets. But its advantages of low cost, excellent corrosion and demagnetization resistance, which makes it widely used in the area of magnetic separator, speaker magnets, magnetic toys, office magnets, car magnets. From the aspect of shape, hard ferrite magnets are usually available as ceramic block magnets, ferrite ring magnets, ferrite disc magnets and ceramic block magnets. Ferrite disc magnets often used on office magnets, ferrite ring magnets often used to make loudspeaker, ferrite block magnetscan be used to make separate magnets.
Ferrite magnets (ceramic magnets ) was developed in the year of 1960, and it is lower in power (B, Br, BHmax) compared to other formulations, and are very brittle. However, they have very high Hcj and good Tc, and are quite corrosion-resistant. So ceramic magnets are a cost-effective choice.
ferrite block magnetproduced by powder metallurgy ways, the remanence is low, The coercive force is high, especially suit for magnetic structure used in the condition of dynamic operation. The material is hard and crisp, silicon carbide tools are used for cutting machine. The main material for ferrite magnets is oxide, not easy to be rust. Permanent ferrite is corrosion resistant magnets or corrosion proof magnets material.
Grade |
Br |
HcB |
HcJ |
(BH)max |
Work Temp |
|
China Standard |
IEC standard |
mT |
kA/m(min.) |
kA/m(min.) |
kJ/m(min.) |
℃(max.) |
Y10T |
HF 8/22 |
200-235 |
125-160 |
210-280 |
6,5-9,5 |
250 |
Y20 |
HF 20/19 |
320-380 |
135-190 |
140-195 |
18,0-22,0 |
250 |
Y22H |
HF 20/28 |
310-360 |
220-250 |
280-320 |
20,0-24,0 |
250 |
Y23 |
HF 22/30 |
320-370 |
170-190 |
190-230 |
20,0-25,0 |
250 |
Y25 |
HF 24/16 |
360-400 |
135-170 |
140-200 |
22,5-28,0 |
250 |
Y26H |
HF 24/23 |
360-390 |
220-250 |
225-255 |
23,0-28,0 |
250 |
Y26H-2 |
HF 24/35 |
360-380 |
263-288 |
318-350 |
24,0-28,0 |
250 |
Y28 |
HF 26/16 |
370-400 |
175-210 |
180-220 |
26,0-30,0 |
250 |
Y25H |
HF 26/18 |
360-390 |
175-215 |
215-230 |
24,0-27,0 |
250 |
Y28H |
HF 26/24 |
380-400 |
240-260 |
250-280 |
27,0-30,0 |
250 |
Y28H-2 |
HF 26/26 |
360-380 |
270-295 |
380-405 |
26,0-30,0 |
250 |
Y30 |
HF 28/16 |
380-385 |
190-210 |
200-220 |
26,0-28,0 |
250 |
Y30BH |
HF 28/28 |
380-400 |
230-275 |
235-290 |
27,0-32,0 |
250 |
Y30H-2 |
HF 30/26 |
395-415 |
275-300 |
310-335 |
28,5-32,5 |
250 |
Y32 |
HF 32/17 |
400-420 |
160-190 |
165-195 |
30,0-33,5 |
250 |
Y33 |
HF 32/22 |
410-430 |
220-250 |
225-255 |
31,5-35,0 |
250 |
Y33H |
HF 32/25 |
410-430 |
240-270 |
250-275 |
31,5-35,0 |
250 |
Y35 |
- |
410-430 |
175-195 |
180-200 |
30,0-32,0 |
250 |
Property/Performance Parameter of Ceramic Magnets(America Standard)
Material |
Br |
HcB |
HcJ |
(BH) Max |
||||
mT |
KG |
KA/m |
KOe |
KA/m |
KOe |
Kj/m3 |
MGOe |
|
C1 |
230 |
148 |
258 |
|||||
C5 |
380 |
191 |
199 |
|||||
C7 |
340 |
258 |
318 |
|||||
C8 |
385 |
235 |
242 |
|||||
C8B |
420 |
232 |
236 |
|||||
C9 |
380 |
280 |
320 |
|||||
C10 |
400 |
288 |
280 |
|||||
C11 |
430 |
200 |
204 |
Meank, as an excellent holding magnets manufacturer, offers a wide range of strong magnets for magnet fishingfor you to choose from.
Send product request
Other supplier products
epoxy coated block magnets | The epoxy coated magnetsare made from neodymium material,the size is 10x5x2mm. Although neodymium magnets have super strong magnetism,the corrosion... | |
Ferrite Pot Magnets | Pot magnets are steel housed permanent magnets,also called cup magnets,which are very useful permanent magnets assemblies, they are results of the ... | |
AlNiCo Magnets | Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coercive fo... | |
Office Magnets/Magnetic Stationery | Strong Office magnetsis a simple application of magnets in office or home. It’s composed of magnets(neodymium power magnets or hard ferrite m... | |
Magnetic Lifter | Category: permanent magnetic lifter china lifting magnets Advantages: scientific magnetic circuit disign, powerful magnets used, strong magnetic ho... |
Same products
Rubber Buoys | Seller: Wuhu Ping\'An Rubber Co., Ltd. | Rubber Buoys At our company, we specialize in offering the highest quality rubber buoysfor marin... | |
Rubber Boat Flooring | Seller: Wuhu Ping\'An Rubber Co., Ltd. | Rubber Boat Flooring When it comes to flooring on a boat, marine rubber boat flooringis the way ... | |
Mooring Bollards | Seller: Wuhu Ping\'An Rubber Co., Ltd. | Mooring Bollards Mooring marine bollards provide a secure and reliable way to anchor boats and o... | |
Ship/Boat Rubber Fenders | Seller: Wuhu Ping\'An Rubber Co., Ltd. | Boat dock rubber fenders are protective devices made of rubber or a similar material that are des... | |
Port Rubber Fender | Seller: Wuhu Ping\'An Rubber Co., Ltd. | A port fender, also known as a starboard fender, is a type of rubber fender specifically designed... |