Galvanized Truss Bridge
Specifications1 Galvanized to Anti-rusting 2 HD200 Bailey Bridge 3 Permanent used 4 Provide engineer and technology guidance at site
The bailey bridge can be used for 20 to 30 years if zinc coated.
Application of the compact standard 200 panel bridge:Single lane: Bridge deck width: 4.2m. Span length: 9.14-76.2mDouble lanes: Bridge deck width: 7.4m. Span length: 9.14-57.9m
The compact 200 panel bridge: The compact 200 panel bridge is similar to the compact 100 panel bridge from their appearance. The difference is its increased panel height to 2.134m. It employed the method of alternating joints between Reinforcement Chords and the joints between panels. This method can decrease inelastic deformation caused by the oversized pinholes. Pre-arch method is used to additionally cut down mid-span and vertical deflection to a larger degree. Bolt-connected components use the orienting sleeve- fixing method to increase accuracy of connections. Shear is created in orienting sleeves and tension is developed in bolts, which increase the usage life of the bolts and ensure the safety of panel bridges. Wind resistant brace is made to be composite type and is connected to transom/girders to improve overall stability of panel bridges.
The part between braced frame and panels is fixed through bridging so as to prevent the whole bridge from side bending. After the erection, there will be a pre-arched degree over the span of the bridge. Besides it can be assembled into single-lane bridges. The compact 200 panel bridge can also be assembled into double lane bridge, hence it broadens its application range. It is suitable for the load designs of HS-15, HS-20, HS-25 and pedrail-50 etc
Span Construction-Load Table ---Extra Single Lane (W=4200mm)
SPAN-ft
HS-15
HS-20
HS-25
30
SS
SS
SS
40
SS
SS
SS
50
SS
SS
SS
60
SS
SS
SS
70
SS
SS
SSR
80
SS
SSR
SSR
90
SSR
SSR
SSR
100
SSR
SSR
SSR
110
SSR
SSR
DS
120
SSR
DS
DSR1
130
DS
DSR1
DSR2H
140
DSR1
DSR2H
DSR3H
150
TSTSR2
DSR2H
DSR4H
160
DSR2H
DSR2H
TSR2
170
TSR2
TSR2
TSR3
180
TSR2
TSR3
TSR3H
190
TSR3H
TSR3
QSR4
200
QSR4
TSR3QSR3
QSR4
Span Construction-Load Table ---Double Lane (W=7350mm)
SPAN-ft
HS-15
HS-20
HS-25
30
SS
SS
SS
40
SS
SS
SS
50
SS
SS
SSR
60
SS
SSR
SSR
70
SSR
SSR
DS
80
SSR
DS
DSR1
90
SSRH
DSR1
DSR2H
100
DSR1
DSR2H
TSR2
110
DSR1
DSR2
QS
120
TS
DSR2H
TSR2
130
DSR2H
TSR2
TSR3
140
TSR2
TSR3
TSR3H
150
TSR3H
TSR3H
QSR4
160
QSR4
QSR4
QSR4
170
QSR4
QSR4
180
QSR4
1.SS shows one range one tier; DS shows two ranges one tier; TS shows three ranges one tier; DD shows two range two tiers etc.
2.If R follows SS, DS, DD, etc, means reinforce type,and R1 means only one range reinforced, R2 means two ranges reinforced
Other supplier products
|
|
Bridge Bearing Pad |
SpecificationsHigh quality cheap bridge bearing pad 1. NR, CR, NBR, SBR, VITON, EPDM, HNBR, SILICONE, BUNA, 2. ISO9001
MaterialsNR, NBR... |
|
|
Double Lane Bridge |
Specifications1 Double lane,two vehicles passing on it 2 Easy installed 3 Send engineers to give a guidance 4 Using unskilled labourCompany introdu... |
|
|
Bailey In Nepal |
Product DescriptionPayment & Shipping Terms MOQ: 1 Set/Sets Means of Transport: Ocean jiangsu bailey steel bridge co.,ltd is one of the bigge... |
|
|
Bailey Chord Reinforcement |
Specifications1 To Increase the bailey bridge strength 2 Bailey Bridge Component 3 Connected on the panel with bolts 4 Protected by zincSpan Constr... |
|
|
Reinforced Concrete Bridge |
Product Description1.Material: (1) cold rolled steel ribbed rebar(2) cold rolled steel round rebar(3) hot rolled steel ribbed rebar2.Wire Diameter:... |
All supplier products
Same products
