BYTF606-2K Primer Surfacer
Auto Coatings
Product Name/Model:BYTF606-2K Primer Surfacer
Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling power andfine adhesion between coats, fast drying time, easy sanded.
|
Substrates |
Dried and sanded existing finishes, all kinds of primer and putty. |
||
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again with degreaser. |
||
|
MixingRatio |
BYTF606-2K Primer Surfacer |
BYTH106 2K Primer Hardener |
Thinner |
|
4 |
1 |
1-1.5 |
|
|
<15℃ |
BYTF606 2K Primer Surfacer |
BYTH106 2K Primer Hardener |
BYTX-1 FastThinner |
|
15-30℃ |
BYTF606 2K Primer Surfacer |
BYTH106 2K Primer Hardener |
BYTX-2 StandardThinner |
|
>30℃ |
BYTF606 2K Primer Surfacer |
BYTH106 2K Primer Hardener |
BYTX-3 SlowThinner |
|
Pot-Life |
At 20°C, 3 hours mixed with hardener, thinner |
||
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends on temperature andpaint film. |
||
|
Drying Time |
|
||
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
||
|
Package |
1L×12or3.75L×4 |
||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
Send product request
Other supplier products
| BM1K Solid Colors (Basecoat Colors) | BM1K Solid Colors (Basecoat Colors) Auto Coatings Manufacturers Product Name/Model:BM1K Solid Colors (Basecoat Colors) Characteristic:BM1K Sol... | |
| 2K Series Hardener | 2K Series Hardener MARSIDE Series Product Name/Model:2K Series Hardener Characteristic: A series of yellow resistant hardener, designed for for 2K... | |
| BYTF605-Epoxy Primer | Auto Coatings Product Name/Model:BYTF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,... | |
| MF1K Silver Colors | MF1K Silver Colors Automotive Paint company Product Name/Model:MF1K Silver Colors Characteristic:MF1K Silver Color with excellent leveling p... | |
| BYTF350 Thinner SRA | BYTF350 Thinner SRA Car Paint Thinner Factory Product Name/Model;BYTF350 Thinner SRA Characteristic: An additive helps to achieve an invisble ... |
Same products
| Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... | |
| Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... | |
| Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... | |
| Pomegranate Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... | |
| Orange Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |













