Medical Equipment & Microbial-resistance Cable Jacket TPU
ATP's Medical Equipment and Microbial-resistance cable Jacket" passed ISO10993 "bio-compatibility" test (authoritative verification report attached );
Pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH，1000Hrs) test;"
V0 grade material passed biological compatibility certification by Suzhou University; excellent resistance to hydrolysis, alcohol, chemical solvent, and low temperature; soft and smooth touch, matte surface; extrusion speed≥60M/min.
The polymer production for Wire for Medical Instruments markets.
Technical Data of Medical Equipment & Microbial-resistance Cable Jacket TPU
|
Technical Data Sheet |
Model |
Model |
||||
|
Material Properties |
Test Standard |
Test Condition |
Unit |
1182F-EMS-1219S |
1185D-ENB-1414S |
|
|
General Characteristics |
Material Category |
- |
- |
- |
||
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
||||
|
Extrusion/Injection |
- |
- |
- |
|||
|
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
84 |
85 |
|
Proportion |
ISO 1183 |
- |
g/cm³ |
|||
|
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
|||
|
Brittle Temperature |
ISO 812 |
- |
℃ |
|||
|
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
465 |
492 |
|
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
|||
|
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
|||
|
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
||
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
|||
|
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
||
|
Permittivity |
ASTM D150 |
- |
- |
|||
|
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
|||
|
Oxygen Index |
ASTM D2863 |
- |
% |
|||
|
Feature |
||||||
As a professional polymer compound manufacturer, we provide tpe elastomer, atp material, antimicrobial tpu, tpu cable jacketand etc. For more information, please feel free to contact us!
Send product request
Other supplier products
 |
Extruding/Under Extruding TPEs | Extrusion-grade TPE Products Characterization: Smooth & matt surface, excellent hand-feeling. Good tensile strength and elasticity. Halog... |
 |
Anti-Mildew TPEs | Thermoplastic Polyether Ester ElastomerApplicable: most kinds of medical equipment and special equipment lines that have biocompatibility, microorg... |
 |
High Hardness LSFH | High Hardness LSFH All or part of the insulation layer, sheath, outer sheath, and auxiliary materials (taping and filling) of halogen-free low-smo... |
 |
XLPE Material from ATPolymer | ATPMaterialis a professional cross linked polyethylene manufacturer, cross linked polyethylene supplier. XLPE is the abbreviation of the English na... |
 |
High Temperature-resistance TPU | Fully support the cable pass UL 758/1581，80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Defender-TTM TPU series (1090T series) is halogen-fre... |
Same products
 |
KY-Lab Twin Screw Extruder | Seller: Nanjing KY Chemical Machinery Co., Ltd. | Overview of KY-Lab Twin Screw Extruder Since its establishment in 1993, KY has been devoted to... |
 |
HK Large Extruder Production System | Seller: Nanjing KY Chemical Machinery Co., Ltd. | Introduction of HK Large ExtruderProduction System KY also offers a larger-scale HK twin screw e... |
 |
HK Extruder for Small Batch Production | Seller: Nanjing KY Chemical Machinery Co., Ltd. | HK36 and HK53 small plastic twin-screw extruders are very competitive equipment models for small ... |
 |
HK73-180 Extruder | Seller: Nanjing KY Chemical Machinery Co., Ltd. | HKY 73-180 low smoke halogen-free (HFFR) or halogen-free flame retardant cable material: the uppe... |
 |
STABURAGS NBU 8 EP 1KG Grease for Machinery Production Line | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | N990pana-023 Panasonic MP Grease Kluber Isoflex Nbu 15 Grease Afc Lubricant K3036c K48-M3856-0... |
