IPPD (4010NA) CAS 101-72-4
101-72-4 –Names and Identifiers
| Name | N-isopropyl-N’-phenyl-p-phenylenediamine |
| Synonyms | 4010na 4010 NA Antigen 3c BHTOX-4010NA Antioxidant-4010NA Akrochem antioxidant pd1 Rubber Antioxidant 4010NA Rubber Antioxidant 4010PPD 4-Anilino-N-isopropylaniline 4-Isopropylaminodiphenylalanine N-isopropyl-N’-phenyl-p-phenylenediamine N-isopropyl- N’-phenyl-ρ-phenylenediamine N-Phenyl-N-Isopropyl-Para-Phenylenediamine N-phenyl-N’-(propan-2-yl)benzene-1,4-diamine 4-Benzenediamine,N-(1-methylethyl)-N’-phenyl-1 1,4-Benzenediamine,N-(1-methylethyl)-N’-phenyl- 1,4-Benzenediamine, N-(1-methylethyl)-N’-phenyl- |
| CAS | 101-72-4 |
| EINECS | 202-969-7 |
| InChI | InChI=1/C22H12.C14H19NO/c;,4)15-13/h1-12H;6-9,15H,5H2,1-4H3 |
101-72-4 –Physico-chemical Properties
| Molecular Formula | C15H18N2 |
| Molar Mass | 226.32 |
| Density | 1,17 g/cm3 |
| Melting Point | 72-76°C |
| Boling Point | 161°C |
| Flash Point | 161°C/1mm |
| Solubility | Chloroform (Slightly), DMSO (Slightly, Sonicated) |
| Vapor Presure | 0.007Pa at 20℃ |
| Appearance | White crystal |
| Color | Grey to Very Dark Grey |
| pKa | 6.76±0.32(Predicted) |
| Storage Condition | -20°C |
| Stability | Stable. Combustible. Incompatible with strong oxidizing agents. |
| Sensitive | Air Sensitive |
| Refractive Index | 1.5000 (estimate) |
| Physical and Chemical Properties | Pure white crystals. |
| Use | Excellent general-purpose antioxidant for natural rubber, synthetic rubber and latex, with excellent protective effect against ozone and flex fatigue aging |
101-72-4 –Risk and Safety
| Risk Codes | R36/37/38 – Irritating to eyes, respiratory system and skin. R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R43 – May cause sensitization by skin contact R22 – Harmful if swallowed |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 – Wear suitable protective clothing. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S60 – This material and its container must be disposed of as hazardous waste. S37 – Wear suitable gloves. S24 – Avoid contact with skin. |
| UN IDs | 3077 |
| RTECS | ST2650000 |
| TSCA | Yes |
| HS Code | 29215900 |
| Hazard Note | Irritant |
| Hazard Class | 9 |
| Packing Group | III |
| Toxicity | LD50 oral in rat: 720mg/kg |
101-72-4 –Upstream Downstream Industry
| Raw Materials | 4-Amino diphenylamine Aniline Acetone Hydrogen Potassium carbonate Isopropanol |
101-72-4 –Reference Information
| LogP | 2.77 at 20℃ |
| use | universal excellent antioxidant for natural rubber, synthetic rubber and latex, excellent protective performance against ozone and flex cracking, and excellent antioxidant for heat, oxygen, light, etc. and general aging. It is often used to manufacture products with high static stress, such as aircraft and automobile tires, bicycle tires, cables, hoses, tapes, rubber rollers and other industrial rubber products. This product is polluting and should not be used in light-colored rubber products. general-purpose excellent antioxidant for natural rubber, synthetic rubber and latex has excellent protective effect against ozone and flex fatigue aging |
| production method | p-aminodiphenylamine (I. e. RT beisi) and acetone in the presence of copper-chromium catalyst at 160-165 ℃ and hydrogen pressure 5-6MPa reaction. The reactants are filtered to remove the catalyst while it is hot, frozen, crystallized, filtered, and dried to obtain the finished product. The filtered mother liquor can recover isopropanol by distillation. Raw material consumption (kg/t)RT Beisi 875 acetone 420 catalyst 12 hydrogen 60 |
Send product request
Other supplier products
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
IS 7020 CAS 9035-99-8 | 9035-99-8 –Names and Identifiers Name Insoluble sulfur Synonyms Insoluble sulfurinsoluble sulfurPolymeric sulfurSulfur, homopol... |
 |
Silicone and modified silane | Introduction Silicone and modified silane are adhesives with moderate adhesive strength, high flexibility, and low hardness, mainly used for bondi... |
 |
Diphenyl sulfone CAS 127-63-9 | CAS:127-63-9, 127-63-9 – Names and Identifiers Name Phenyl sulfone Synonyms s-97s-127DifenylsulfonphenylsulPhenyl sulfonePheny... |
 |
Polyester Clear Powder Coatings | This series of product are made of polyester resin (as hardener) and highly transparentmaterials. There are two types of products are suitable for ... |
Same products
 |
Heat Sealing Sterilization Pouch | Seller: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Seller: Trucont LLC | At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi... |
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
