EPPD CAS 793-24-8,3081-01-4
793-24-8 –Names and Identifiers
| Name | N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine |
| Synonyms | BHTOX-4020 Flexzone 7F Vulkanox 4020 Santoflex6PPD Antoxidant 6ppd Antoxidant 4020 Santoflex 134PD Antioxidant 4020 N-(1,3-Dimethylbutyl Rubber Antioxidant 4020 SANTOFLEX(R) 13 PASTILLES Rubber Antioxidant 4020PPD N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine N-(1,3-Dimethylbutyl)-N-Phenyl-1,4-Benzenediamine N-(1,3-Dimethylbutyl)-N-Phenyl-p-phenylene Diamine N-(1,3-Dimethylbutyl)-N’-phenyl-p-phenylenediamine N-(1.3-dimethylbutyl)-N’-phenyl-p-phenylenediamine N-(4-methylpentan-2-yl)-N’-phenylbenzene-1,4-diamine 1,4-BenzenediaMine,N1-(1,3-diMethylbutyl)-N4-phenyl- N1-(4-methylpentan-2-yl)-N4-phenyl-benzene-1,4-diamine 1-N-(4-methylpentan-2-yl)-4-N-phenylbenzene-1,4-diamine 4020,N-(1,3-DiMethylbutyl)-N’-phenyl-p-phenylenediaMine |
| CAS | 793-24-8 |
| EINECS | 212-344-0 |
| InChI | InChI=1/C18H24N2/c/h4-12,14-15,19-20H,13H2,1-3H3 |
| InChIKey | ZZMVLMVFYMGSMY-UHFFFAOYSA-N |
793-24-8 –Physico-chemical Properties
| Molecular Formula | C18H24N2 |
| Molar Mass | 268.4 |
| Density | 0.986~1.00g/cm3 |
| Melting Point | 45-46°C |
| Boling Point | 260°C |
| Flash Point | 204°C |
| Water Solubility | <0.1 g/100 mL at 17 ºC |
| Solubility | soluble in Methanol |
| Vapor Presure | 5.22E-07mmHg at 25°C |
| Appearance | Dark brown black solid |
| Color | Light orange to Dark red to Black |
| pKa | 6.73±0.32(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.6300 (estimate) |
| MDL | MFCD00072248 |
| Physical and Chemical Properties | Gray-black solid. |
| Use | Natural rubber and synthetic rubber with anti-ozone agent and antioxidant, ozone crack and flex fatigue excellent protective effect |
793-24-8 –Risk and Safety
| Risk Codes | R22 – Harmful if swallowed R43 – May cause sensitization by skin contact R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S36/37 – Wear suitable protective clothing and gloves. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 3077 9 / PGIII |
| WGK Germany | 2 |
| RTECS | ST0900000 |
| HS Code | 29215190 |
| Hazard Class | 9 |
| Packing Group | III |
| Toxicity | LD50 oral in rat: 3580mg/kg |
3081-01-4 –Names and Identifiers
| Name | N-(1,4-dimethylpentyl)-N’-phenylbenzene-1,4-diamine |
| Synonyms | Einecs 221-374-3 SANTOFLEX14ANTIOZONANT N14DIMETHYLPENTYLNPHENYL14BENZENEDIAMINE N-(1,4-Dimethylamyl)-N’-phenyl-p-phenylenediamine N-(1,4-dimethylpentyl)-N’-phenylbenzene-1,4-diamine N-(1,4-dimethylpentyl)-N’-phenyl-p-phenylenediamine 1,4-Benzenediamine, N-(1,4-dimethylpentyl)-N-phenyl- 1,4-Benzenediamine, N1-(1,4-dimethylpentyl)-N4-phenyl- |
| CAS | 3081-01-4 |
| EINECS | 221-374-3 |
3081-01-4 –Physico-chemical Properties
| Molecular Formula | C19H26N2 |
| Molar Mass | 282.42 |
| Density | 0.9517 (rough estimate) |
| Boling Point | 415.03°C (rough estimate) |
| Water Solubility | 670μg/L at 25℃ |
| Vapor Presure | 0Pa at 25℃ |
| pKa | 6.70±0.50(Predicted) |
| Refractive Index | 1.8676 (estimate) |
3081-01-4 –References
| LogP | 5.17 at 20℃ |
Send product request
Other supplier products
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
DBSP 2,4-Bis(phenylsulfonyl)phenol CAS | CAS: – Names and Identifiers Name 2.4-Bis(phenylsulfonyl)phenol Synonyms F-112 (DBSP)Bis(phenylsulfonyl)phenol2.4-bis(pheny... |
 |
Benzene Melamine Resin | Introduction to Benzene Melamine Resin (BMR) Benzene melamine resin is a thermosetting polymer synthesized from melamine and formaldehyde, modifie... |
 |
7PPD CAS 3081-01-4 | 3081-01-4 –Names and Identifiers Name N-(1,4-dimethylpentyl)-N’-phenylbenzene-1,4-diamine Synonyms Einecs 221-374-3SANTOF... |
 |
Fluorinated surfactant solution STD 2461 | Introduction Composition: Fluorinated surfactant solution Appearance: light yellow viscous liquid Active ingredient: 18% Solvent: water/alcohol... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
