MBTS (DM) CAS 120-78-5
120-78-5 –Names and Identifiers
| Name | Accelerator (DM) |
| Synonyms | DM MBTS acceltm Accel TM AcceleratorDM Acelerator DM benzothiazolyl AcceleratorMBTS accelerator(dm) Accelerator (DM) Accelerator MBTS Benzothiazyldisuflide Rubber Accelerator DM benzothiazoledisulfide Rubber Accelerator MBTS Benzothiazole disulfide 2-benzothiazyldisulfide Dibenzothiazole Disulfide 2,2′-dithiobis-benzothiazol Benzothiazol-2-yl disulfide 2,2′-Dithiobis(Benzothiazole) 2,2′-Dibenzothiazoledisulfide 2,2-D ibenzothiazole Disulfide 2,2′-Dibenzothiazole disulfide Benzothiazole, 2,2′-dithiobis- 2-mercaptobenzothiazyldisulfide 1,3-benzothiazole 1,1-disulfide 2-mercaptobenzothiazoledisulfide 2-Mercaptobenzothiazyl disulfide 2,2′-bis(benzothiazolyl)disulfide 2-Mercaptobenzothiazole disulfide 2,2′-disulfanediylbis(1,3-benzothiazole) Rubber Pharmaceutical intermediate Refined(DM) 2-(1,3-Benzothiazol-2-yldisulfanyl)-1,3-benzothiazole |
| CAS | 120-78-5 |
| EINECS | 204-424-9 |
| InChI | InChI=1/C14H8N2S4/c/h1-8H |
120-78-5 –Physico-chemical Properties
| Molecular Formula | C14H8N2S4 |
| Molar Mass | 332.49 |
| Density | 1.467g/cm3 |
| Melting Point | 177-180℃ |
| Boling Point | 358.898°C at 760 mmHg |
| Flash Point | 170.855°C |
| Water Solubility | <0.01 g/100 mL at 21℃ |
| Vapor Presure | 0mmHg at 25°C |
| Appearance | Crystallization |
| Storage Condition | 2-8℃ |
| Sensitive | Easily absorbing moisture |
| Refractive Index | 1.752 |
| MDL | MFCD00022874 |
| Physical and Chemical Properties | Density 1.5 melting point 177-180°C flash point 271°C water-soluble <0.01g/100 mL at 21°C |
| Use | It is used as a universal accelerator for natural rubber, synthetic rubber and reclaimed rubber. It is mainly used in the manufacture of tires, inner tube, adhesive tape, rubber shoes and general industrial products. High purity DM (pharmaceutical grade) is an important pharmaceutical intermediate for the manufacture of cephalosporins. |
120-78-5 –Risk and Safety
| Hazard Symbols | Xi – Irritant N – Dangerous for the environment |
| Risk Codes | R31 – Contact with acids liberates toxic gas R43 – May cause sensitization by skin contact R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S36/37 – Wear suitable protective clothing and gloves. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 3077 |
120-78-5 –Upstream Downstream Industry
| Raw Materials | Aniline Sodium hypochlorite 2-Mercaptobenzothiazole Carbon disulfide Toluene Sulfur(α) Sulfuric acid Chlorine Sodium hydroxide Sodium nitrite Ammonia |
Send product request
Other supplier products
 |
Silicone fluid（MT6000 ） | PRODUCT DESCRIPTION MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid. APPLICATIONS • Thermostatic fluids (-5... |
 |
Solvent Adhesive Series Products | Introduction The series of solvent based adhesive products includes single/two-component moisture cured solvent based polyurethane adhesives, as w... |
 |
Single/two-component epoxy adhesive | Epoxy adhesive is a structural adhesive with high bonding strength. Suitable for bonding various substrates, especially with high bonding strength ... |
 |
DBSP 2,4-Bis(phenylsulfonyl)phenol CAS | CAS: – Names and Identifiers Name 2.4-Bis(phenylsulfonyl)phenol Synonyms F-112 (DBSP)Bis(phenylsulfonyl)phenol2.4-bis(pheny... |
 |
Camera adhesive | Introduction With the increasing demand for consumer electronics and the development of autonomous driving in automobiles, the demand for came... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
