High-Purity Acetylene
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Details
Product Names
High-Purity Acetylene
Industrial Acetylene
Acetylene
Purity
High-Purity Acetylene: ≥99.9%
Industrial Acetylene: ≥98%
Impurity Content (ppm)
| Impurity | High-Purity Acetylene | Industrial Acetylene |
|---|---|---|
| Water (H₂O) | – | – |
| Carbon Monoxide (CO) | – | – |
| Carbon Dioxide (CO₂) | – | – |
| Hydrocarbons (THC) | – | – |
| Phosphine | Silver nitrate paper shows no color change | – |
| Hydrogen Sulfide (H₂S) | Silver nitrate paper shows no color change | – |
Packaging
Filled in 40L steel cylinders.
Applications
Recommended for industrial use; used in the sugar industry, alkali industry, lead white production, as well as in cold drinks, fire extinguishing, and organic synthesis. Please conduct a risk assessment before use.
Safety Information
CAS Number: 74-86-2.
Physical and Chemical Properties: Colorless and odorless gas, industrial grade has an unpleasant garlic odor. Slightly soluble in water and ethanol, soluble in acetone, chloroform, benzene. Melting point (℃): -81.8 (119kPa); Boiling point (℃): -83.8; Relative density (water=1): 0.62; Relative density (air=1): 0.91; Saturation vapor pressure (kPa): 4460 (20℃); Flash point (℃): <-50; Combustion heat (kJ/mol): 1298.4; Critical temperature (℃): 35.2; Critical pressure (MPa): 6.19; Upper explosion limit (v%): 100; Lower explosion limit (v%): 2.5; Ignition temperature (℃): 305.
Combustion and Explosion Hazards: Flammable, forms explosive mixtures with air. Highly prone to combustion and explosion. Can form explosive mixtures with air, which can ignite and explode upon contact with open flames or high heat. Reacts violently with oxidizers. Compression or heating can cause violent explosions. Reacts violently with fluorine, chlorine, etc. Can form explosive substances with compounds of copper, silver, mercury, etc.
Firefighting Methods: Cut off the gas supply. If the gas supply cannot be cut off, do not extinguish the fire at the leak site. Firefighters must wear air respirators and full protective clothing, and fight the fire from the upwind direction. Remove containers from the fire area if possible. Cool the containers with water until the fire is out. Fire extinguishing agents: water spray, foam, carbon dioxide, dry powder.
Health Hazards: Has a weak anesthetic effect. Inhalation of high concentrations can cause simple asphyxiation. Exposure to 20% concentration shows obvious symptoms of oxygen deficiency; inhalation of high concentrations initially causes excitement, loquaciousness, emotional instability, followed by dizziness, headache, nausea, vomiting, ataxia, somnolence; severe cases may lead to coma, cyanosis, disappearance of pupillary light reflex, weak and irregular pulse. Toxicity increases when mixed with phosphine, hydrogen sulfide, and attention should be paid.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Send product request
Other supplier products
 |
Office Furniture Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Features Superior Charge Retention and Leveling: Offers higher gloss, full and ... |
 |
1,3-Propane sultone CAS 1120-71-4 | WA：+86 132 6275 2056 WEB: std-coatings.com 1.3-Propane sultone (1.3-PS), also known as 1.3-propanesultone or 1.3-propane sulfone inner ester, i... |
 |
Polyester based powder coatings MT-600 AM | Product Description MT-600 AM is a series of polyester based powder coatings, formulated with the use of TGIC, designed for the exterior environme... |
 |
Polyester Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This series of products is a thermosetting powder coating made from a mixture... |
 |
Flat metal POWDER COATING MT-049/94947 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/94947 Color Luanhua (Champagne) Surface Flat metal System Polyeste... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
