Ultra-Pure Argon
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Details
Product Names
Ultra-Pure Argon
High-Purity Argon
Argon
Purity
Ultra-Pure Argon: ≥99.9999%
High-Purity Argon: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-Pure Argon | High-Purity Argon |
|---|---|---|
| Water (H₂O) | ≤0.6 | ≤3 |
| Oxygen (O₂) | ≤0.1 | ≤1.5 |
| Nitrogen (N₂) | ≤1 | ≤4 |
| Carbon Monoxide (CO) | ≤0.1 | ≤1 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤1 |
| Hydrocarbons (THC) | ≤0.1 | ≤1 |
Packaging
Filled in steel cylinders of 40L, 49L, 50L, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial and laboratory use, including bulb inflation, welding, and instrument experiments.
Safety Information
CAS Number: 7440-37-1.
Physical and Chemical Properties: Colorless and odorless inert gas. Slightly soluble in water. Melting point (℃): -189.2; Boiling point (℃): -185.7; Relative density (water=1): 1.40 (-186℃); Relative density (air=1): 1.38; Saturation vapor pressure (kPa): 202.64 (-179℃); Flash point (℃): No data; Combustion heat (kJ/mol): 241; Critical temperature (℃): -122.3; Critical pressure (MPa): 4.86; Upper explosion limit (v%): Not applicable; Lower explosion limit (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable, asphyxiating. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Non-toxic under normal pressure. High concentrations can cause asphyxiation by reducing oxygen partial pressure. Argon concentrations above 50% can cause severe symptoms; concentrations above 75% can be fatal within minutes. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death. Liquid argon can cause frostbite; eye contact can cause inflammation.
First Aid Measures: Skin contact: Seek medical treatment if frostbite occurs. Eye contact: Lift the eyelid and flush with running water or saline for at least 15 minutes. Seek medical attention. Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Send product request
Other supplier products
 |
Exterior durable polyester powder coatings with antimicrobial technology MT-610 AM | WA：+86 132 6275 2056 WEB: std-coatings.com Product description MT-610 AM is a range of polyester TGIC Free powder coatings designed for exteri... |
 |
Post-forming powder coatings | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction Chemical Type: Epoxy/Polyester or Pure Polyester Appearance: Depends on specific prod... |
 |
Valves and pipes powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction The main components are epoxy resin and curing agent. Brief description It... |
 |
Anti-Graffiti Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Durable powder coating engineered to resist graffiti paints and inks, all... |
 |
High Reflectivity (Infrared Camouflage Cooling) Powder Series | Introduction Key Features & Specifications FeatureSpecification / Benefit Reflective Cooling Effect Reflects >90% of solar i... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
