Pultrusion Epoxy STDResin8510
Introduction
STDResin 8510 is composed of epoxy resin (Component A), modified curing agent (Component B), and catalyst (Component C), specifically designed for pultrusion processes. It features low viscosity, long pot life, excellent processability, rapid curing at appropriate temperatures, outstanding mechanical properties, strong fiber adhesion, and recyclability through degradation.
Applications
- Pultruded pipes, rods, and profiles of various cross-sectional shapes and sizes
- Composite products manufactured by other pultrusion processes
Typical Physical Properties of Components (Pre-Curing)
| Component | Component A | Component B | Component C |
|---|---|---|---|
| Appearance | Colorless or pale yellow liquid | Colorless or pale yellow liquid | Colorless or pale yellow liquid |
| Viscosity (25℃)/mPa·s | 11,000-14,000 | 25-100 | 150-300 |
| Mixed Viscosity (25℃)/mPa·s | 500-800 | 500-800 | 500-800 |
| Density/g*cm⁻³ | 1.15-1.25 | 1.15-1.25 | 0.95-1.05 |
Mixing Ratio
| Component | Component A | Component B | Component C |
|---|---|---|---|
| Weight Ratio | 100 | 85 | 15 |
Cured Material Properties
| Property | Value |
|---|---|
| Tensile Strength/MPa | 75 |
| Tensile Modulus/MPa | 3,000 |
| Tensile Elongation at Break | ≥5% |
| Flexural Strength/MPa | 120 |
| Flexural Modulus/MPa | 3,000 |
| Glass Transition Temperature/℃ | 121 |
| Volume Shrinkage/% | <5 |
| Linear Shrinkage/% | <0.6 |
| Water Absorption (24h/7d, 23℃)/% | <0.4 |
*Data represents typical cured properties, not product specifications. Curing regime: 100℃/0.5h + 200℃/0.5h.
Pultrusion Temperature Zones
| Zone | Temperature/℃ |
|---|---|
| Zone 1 | 180±5 |
| Zone 2 | 195±5 |
| Zone 3 | 195±5 |
| Line Speed/m/min | 0.5 |
Gel Time
| Temperature/℃ | Gel Time/s |
|---|---|
| 120 | 360-460 |
| 150 | 70-130 |
| 160 | 45-80 |
| 180 | 25-35 |
| 200 | 10-20 |
Packaging
25Kg, 200Kg, 1000Kg
Storage Conditions & Shelf Life
- Store in a cool, dry, and clean environment.
- Reseal immediately after use.
- Shelf life: 24 months in original packaging under proper storage conditions.
Personal Protection
| Category | Requirement |
|---|---|
| PPE | Wear impermeable protective gloves to avoid skin contact. |
| Respiratory Protection | No special protection required. |
| Eye Protection | Chemical splash goggles recommended. |
| Body Protection | Use protective clothing resistant to this product. Equip with safety boots, gloves, eyewash stations, and emergency showers as needed. |
First Aid Treatment
Skin Contact
- Wash thoroughly with soap and water for 5 minutes or until contaminants are removed.
Eye Contact
- Lift eyelids and rinse eyes with flowing water or saline solution for 20 minutes.
- Seek immediate medical attention.
Inhalation
- Move to fresh air immediately.
- Consult a physician if symptoms persist.
Send product request
Other supplier products
 |
Heat Resistant Black Thermal Tape ESD Low Static Polyimide Film | Detail Information AttributeDetails Place Of Origin Guangdong, China Certification RoHS Product Name E2-B821B Thermal... |
 |
Leveling agent STD-236N | Leveling Agent STD-236N is a high-performance polyether-modified polysiloxane designed to enhance the leveling and anti-sag properties of coatings.... |
 |
Clear Polyester Heat Resistant Adhesive Tape 0.06mm Anti Static Power Coating | Detail Information AttributeDetails Place Of Origin China Product Name STD-E1-TH862TD Certification RoHS Total Tape T... |
 |
Crepe Paper Heat Resistant Adhesive Tape 5.2mil For Wave Soldering Process | Detail Information AttributeDetails Place Of Origin Guangdong, China Certification RoHS Product Name MH310C Tensile S... |
 |
Indanthrone Blue CAS 81-77-6 | Introduction Indanthrone Blue, with the CAS number 81-77-6. is a high-performance pigment known for its deep blue color and excellent stability. T... |
Same products
 |
Powder coatings for automotive interior parts MT-A2201/MT-YN203GF | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YN218GF / | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be u... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I | Seller: Standard International Group (HK) Limited | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof rack... |
 |
Basecoat powder coating MT-A2204/MT-MW188I | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2204 basecoat comes in an... |
