Silicone Oil ALFARES-60000

• 

Product description

ALFARES 60000 is a silicone fluid based on straight-chained polydimethylsiloxane fluids.

Applications

• Thermostatic fluids (–50 °C to 200 °C).
• Dielectric fluids (impregnation of paper for condensers).
• Anti-blotting products for photocopying machines.
• Thinning and plastifying agents for RTVs and silicone sealants.
• Lubricating and heat-protecting agents for textile threads (synthetic sewing threads).
• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).
• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).
• Water-repellent treatment:
• – of powders (for paints and plastics)
• – of fibres: glass fibres
• Release agents (mould release for plastics and metal castings).
• Surfactants for styrene-butadiene foam.

Typical Properties

• Very good resistance to high and low temperatures.
• Good combustion resistance.
• Good dielectric properties.
• Low surface tension.
• High compressibility.
• Absence of ageing upon exposure to atmospheric agents.
• Good oxidation resistance.
• Little change in viscosity with temperature.
• Good resistance to high and prolonged shear stress.

Storage and handing

When stored in the original unopened packaging at a temperature between –20 °C and 50 °C, products may be stored for up to 2 years from its date of manufacture (expiry date).

Comply with storage instructions and expiry date marked on the packaging, and observe all recommendations made by the Material Safety Data Sheet (MSDS) at all times.

Product safety

The Safety Data Sheet (SDS) should always be read and completely understood prior to handling any chemical product.

It is important that adequate safety procedures are followed by the user.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Pure polyester/Primid type powder coating series	Introduction: Made of polyester resin and Primid curing agent as the main raw materials. Features: –Good adhesion and excellent mechanical ...
	Surface Finish Powder Coatings for Performance & Aesthetics	Surface That Performs & Impresses In today’s industrial design, appearance matters as much as performance. Our Powder Coatings by Surfac...
	IT industry powder coating	Brief description: Made of TGIC polyester, epoxy polyester mixed type, etc. as base materials Features: Excellent physical and mechanical proper...
	Colorful metal powder	1. Product Overview This product takes polyester resin and epoxy resin as the main base materials, integrating the excellent decorative performanc...
	Dual-Layer Epoxy Anti-Corrosion Powder Coating (External Coating)	Surface Finish Options Overview Product Introduction: This dual-layer epoxy powder coating is formulated using multiple types of epoxy re...

Same products

	Epimedium Extract	Seller: Xi'an Yuensun Biological Technology Co., Ltd.	Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
	Pumpkin Powder	Seller: Xi'an Yuensun Biological Technology Co., Ltd.	Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
	Broccoli Powder	Seller: Xi'an Yuensun Biological Technology Co., Ltd.	Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
	Pomegranate Powder	Seller: Xi'an Yuensun Biological Technology Co., Ltd.	Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...
	Orange Powder	Seller: Xi'an Yuensun Biological Technology Co., Ltd.	Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel...