Valves and pipes powder coating
Introduction
The main components are epoxy resin and curing agent.
Brief description
It is mainly composed of epoxy resin and curing agent.
Features
- Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.)
- Good coating surface effect
- Strong corrosion resistance
- Good insulation
Application areas
Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields
Product series
Standard curing type and low temperature curing type are available
Can be made into various glosses and colors
Can be made into hot melt epoxy
Technical parameters
Powder performance
Specific gravity: 1.1~1.8g/cm³
Mechanical properties
| Test items | Test standards | Performance indicators |
|---|---|---|
| Pencil hardness | GB/T6739-1996 | >2H |
| Adhesion | GB/T9286-1998 | Grade 0 |
| Bending | GB6742-86 | Φ3mm |
| Impact | GB/T1732-93 | 50kg.cm |
| Cupping | GB9753-88 | >6mm |
Corrosion resistance
| Test items | Test standards | Performance indicators |
|---|---|---|
| Salt spray resistance | GB/T1771-91 | No change in coating after 1000 hours, unilateral corrosion at scratches <2mm |
| Moisture and heat resistance | GB/T1740-79 | Slight gloss loss after 1000 hours, ≤1 level |
Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.
Application conditions
Pretreatment: phosphating, chromating, sandblasting
Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping
Curing conditions:
200℃ at 10 minutes
180℃ at 15 minutes
Can also be designed according to customer needs
Drinking water product certification
British WRA5 standard
US NSF61 standard
German KTW/W270 standard
Drinking water valve testing standards: BS/EN14901. ANSI/NSF61
Packaging
Carton packaging, net weight 20kg/box
Lined with double-layer polyethylene plastic bags
Storage conditions
Store in a dry and ventilated room below 30℃
Avoid direct sunlight
Under this condition, the powder can be stably stored for 6 months
Safety and health
- All raw materials of powder coatings do not contain toxic substances.
- No toxic gas is released during baking.
- Avoid inhalation of dust during use.
- Operators should wear dust masks.
- Minimize long-term contact between skin and powder.
- Paint attached to the skin can be washed with soap.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Bronze Gold Hammer Texture Powder Coating | Product Description iteminformation Method Spray Certification RoHS, ISO9001. Reach, FDA, En71 Thickness 60-80 (μm) ... |
 |
Decorative Powder Coatings | Introduction Product SegmentationApplication Fields Wrinkle (Orange Peel) Powder High-end aluminum profiles, electric vehicles, medica... |
 |
Modified Chlorinated Polyether Powder Coating | High-Performance Chlorinated Polyether (CPE) Powder Coatings Direct-from-Factory Manufacturing | Global B2B Solutions We manufacture and supply h... |
 |
Highly chemical resistant powder coatings | Product description MT-EC 1301 is a series of high-performance polyurethane powder coatings formulated in order to provide excellent anti-graffiti... |
 |
Commercial & Residential Powder Coating | Introduction CategoryApplicationsPurposeKey Advantages Architectural Powder Coating Curtain walls, façade panels, aluminum prof... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
