.

Epoxy Powder Coating

Introduction

The main components are epoxy resin and curing agent.

Brief description

It is mainly composed of epoxy resin and curing agent.

Features

  • Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.)
  • Good coating surface effect.
  • Strong corrosion resistance.
  • Good insulation.

Application areas

Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields.

Product series

Standard curing type and low temperature curing type are available.

Can be made into various glosses and colors.

Can be made into hot melt epoxy.

Technical parameters

Powder performance

Specific gravity: 1.1~1.8g/cm³

Mechanical properties

Test itemsTest standardsPerformance indicators
Pencil hardness GB/T6739-1996 >2H
Adhesion GB/T9286-1998 Grade 0
Bending GB6742-86 Φ3mm
Impact GB/T1732-93 50kg.cm
Cupping GB9753-88 >6mm

Corrosion resistance

Test itemsTest standardsPerformance indicators
Salt spray resistance GB/T1771-91 No change in coating after 1000 hours, unilateral corrosion at scratches <2mm
​Moisture and heat resistance GB/T1740-79 Slight gloss loss after 1000 hours, ≤1 level

Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.

Application conditions

Pretreatment: phosphating, chromating, sandblasting

Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping

Curing conditions:

200℃ at 10 minutes.

180℃ at 15 minutes.

Can also be designed according to customer needs.

Drinking water product certification

British WRA5 standard..

US NSF61 standard.

German KTW/W270 standard.

Drinking water valve testing standards: BS/EN14901. ANSI/NSF61.

Packaging

Carton packaging, net weight 20kg/box.

Lined with double-layer polyethylene plastic bags.

Storage conditions

Store in a dry and ventilated room below 30℃.

Avoid direct sunlight.

Under this condition, the powder can be stably stored for 6 months.

Safety and health

  • All raw materials of powder coatings do not contain toxic substances.
  • No toxic gas is released during baking.
  • Avoid inhalation of dust during use.
  • Operators should wear dust masks.
  • Minimize long-term contact between skin and powder.
  • Paint attached to the skin can be washed with soap.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Sand grain metal MT-049/77578
Sand grain metal MT-049/77578 Introduction No. MT-049/77578 Color Xuanyou (grey) Surface Sand grain metal System Polyester Scope of applicatio...
Green series powder coating
Green series powder coating Surface Finish Options Overview Pure green powder coating MT-PMG0001 Silver green powder coating MT-PMG0002 Light green silver powder ...
Furniture Powder Coatings-coating powder manufacturer
Furniture Powder Coatings-coating powder manufacturer We are a leading Chinese powder coating factory with over 20 years of export experience, supplying high-quality coatings to furniture manufacturers...
Metallic plane MT-049/94501
Metallic plane MT-049/94501 Introduction No. MT-049/94501 Color Gray Surface Metallic plane System Resin imported from Austria Packing Speci...
Yellow matte powder coating
Yellow matte powder coating This series of powder coatings adopts an environmentally friendly formula system, specially designed for electrostatic spraying process, with the c...
All supplier products

Same products

Epimedium Extract
Epimedium Extract Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
Pumpkin Powder
Pumpkin Powder Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
Broccoli Powder
Broccoli Powder Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
Pomegranate Powder
Pomegranate Powder Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...
Orange Powder
Orange Powder Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel...