Powder coating for pipeline anticorrosion
Introduction
The service life of the pipeline depends largely on the anti-corrosion method of the steel pipe. The use of good coating materials and coating methods can make the service life of the pipeline reach decades or longer. Before the 1950s, the materials used for anti-corrosion coatings were mainly coal tar enamels and other materials, which provided good protection for the pipeline. However, these materials also had many disadvantages and their application scope was limited to a certain extent. It was not until the late 1950s that the introduction of epoxy resin heavy anti-corrosion sintered powder coatings made a leap in pipeline protection technology. Experts have evaluated and compared several anti-corrosion materials based on decades of experience data. It can be seen that epoxy sintered powder coatings are incomparable to other materials from both technical and economic perspectives.
Standard pipeline powder coating melts a layer of 300-800 microns of thermosetting epoxy organic coating with good bonding ability on the inner wall of the steel pipe. It not only has the characteristics of high strength, easy connection and water impact resistance of steel pipes, but also overcomes the characteristics of easy corrosion, pollution, scaling and poor fire protection performance of steel pipes when encountering water.
Steel pipes can be directly used in drinking water projects, meet sanitary performance indicators, and have a service life of 30-50 years.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
| Glossy and Bright Yellow Powder Coating | Introduction High gloss powder coating is a kind of excellent performance coating, with the following characteristics: – Appearance perform... | |
| Solvent-based coating additives STD F-810 | Product Features Significantly improves adhesion to UV curing inks Excellent fluidity and leveling Eliminates craters and pinholes Does not c... | |
| Electrical insulation powder | Product description This series of products is made of epoxy resin and curing agent as the main raw materials. Features: —Good adhesion, g... | |
| Valves and pipes powder coating | Introduction The main components are epoxy resin and curing agent. Brief description It is mainly composed of epoxy resin and curing agent. F... | |
| Powder coating series for vehicle compartment | Introduction With the development of environmental protection and energy conservation, the central environmental protection department and local g... |
Same products
| Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... | |
| Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... | |
| Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... | |
| Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... | |
| Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |















