Methyl Isoamyl Ketone MIAK
Applications
.Autooem
.Autorefinish
. Generalindustrial coatings
. Paints&coatings
. Processsolvents
Key Attributes
. Excellent solventactivity
. Highdilutionratio
. Inert–Nonfooduse
. Lowdensity
. Lowsurface tension
. Non-HAP
. Non-SARA
. REACHcompliant
. Readilybiodegradable
. Slow evaporationrate
. Urethanegrade
Product
MT-MIAK(Methyl IsoamylKetone)hashigh solvent activity, slow evaporationrate,lowdensity,lowsurfacetension, and ahighboilingpoint. ThesepropertiesmakeMIAK a very good solventforhigh-solidscoatings.
Becauseregulationslimit the weight of solventper gallon of coating,formulatorsfavor theuseoflow-density solvents thathelpreduce the VOC content of a coating.
MIAKislowerindensitythanester,aromatic hydrocarbons, and glycol ether solvents with similarevaporationrates.
ThelowdensityandhighactivityofMIAKare significant advantages when formulatinglow-viscosity,high-solids coatings. Inaddition,MIAKisusefulasapolymerization solvent forhigh solids acrylicresins.
TypicalProperties
| Property | Typical Value,Units |
| General | |
| Acidity
as Acetic Acid |
0.01 wt % max. |
| Assay | 98.5 wt % min. |
| Autoignition Temperature | 424 °C (795 °F) |
| Azeotropes
BP |
94.7°C(202.5°F) |
| Wt%Water | 44wt% |
| BlushResistance
@ 80°F(26.7°C) |
89%RH |
| BoilingPoint@760mmHg
DryPoint Initial |
148°C(298°F) 141°C(286°F) |
| Color
Pt-Co |
10max. |
| CriticalPressure | 29.3 ATM |
| Critical Temperature | 327.8°C |
| Critical Volume | 421ml/g·mol |
| DilutionRatio
Toluene VMPNaphtha |
4.1 1.2 |
| ElectricalResistance | 0.6Megohms |
| EmpiricalFormula | C7H14O |
| EvaporationRate
(ether=1) (n-butyl acetate=1) |
24.20.5 |
| Expansion Coefficient,per°C@20°C | 0.00107 |
| FlashPoint
Tag ClosedCup |
36°C(96°F) |
| FreezingPoint | -74°C(-101°F) |
| Hansen SolubilityParameters
HydrogenBonding Nonpolar Polar Total |
2 7.6 2.8 8.3 |
| Heat of Combustion | -979.9kcal/g·mol |
| Heat of Vaporization | 9186 cal/g·mol |
| LiquidHeat Capacity@25°C | 59.64 cal/(g*mol)(°C) |
| Liquid Viscosity
@25°C |
0.7 cP(mPa·s) |
| Molecular Weight | 114.19 |
| Nitrocellulose Solubility | Active |
| RefractiveIndex@20°C | 1.4078 |
| Solubility
in Water,@20°C Waterin,@20°C |
0.5wt% 1.2wt% |
| Specific Gravity
@20°C/20°C |
0.813 |
| Surface Tension
@20°C |
25.8 dynes/cm |
| TLVPPM1998 | 50 |
| VaporDensity
(air=1) |
3.9 |
| VaporPressure
@20°C @55°C |
4.5mmHg 3.7kPa |
| Wt/Vol
@20°C |
0.81kg/L(6.76lb/gal) |
Comments
The properties reported here are typical values for an average batch. There is no guarantee that material from any particular batch will exactly conform to the values given.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Flame retardant insulation powder coating | Brief description: Flame retardant insulation pressure-resistant powder coating made of pure epoxy resin, through the dipping process, the film th... |
 |
Powder coating primer containing zinc MT-PZ ALZ55N | Product Description MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of mild steel. This d... |
|
|
Powder coatings for Automotive trim parts | Product Description MT-A2201 powders can be used for pillars and appliqués, roof racks, grille guards, bumpers, hitches, mirror housings, a... |
 |
MDF powder coating | Brief description: Made of epoxy type, epoxy polyester mixed type, etc. as base materials. Features: It has the advantages of solvent-free, poll... |
 |
Durable polyester powder coatings MT-A1000- YG001V- Red color | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT Autobody powder coating isa series of durable polyester powder coatings desi... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
